MAINTENANCE OILS
MORRIS PRODUCTS
MORRIS Race SUS 5Wt Suspension Grades are formulated from high quality base fluids and performance additives that ensure smooth predictable damping over a wide temperature range and under a variety of operating conditions. Balanced additive chemistry protects suspension unit components and the integrity of the seal materials. • Outstanding low temperature performance • Cold start fluidity and high temperature performance • Long stable oil life • Excellent filterability • Compatible with all Bronze and Steel system parts • Latest anti-wear and EP technology • Good thermal stability • Strong rust prevention, even in the presence of seawater. Part No. Race SUS 5Wt, 1ltr 90-580
MORRIS Race Light Gear Oil Manufactured from synthetic base oil, special friction modifiers and other modern additives, it is particularly effective in protecting gears from the effects of shock loading and prolonged high temperature operation. This is the first choice for all high performance road and competition machines where a 10W-40 grade is specified.
Part No. 90-530
Light Gear Oil, 1ltr
90-530
90-580
MORRIS Race Foam Filter Cleaner
MORRIS Race Foam Filter Oil Race Foam Filter Oil is the first choice for high performance engines both on and off road and under the most severe of racing conditions, when enormous amounts of air are breathed through the engine in a very short space of time. Race Foam Filter Oil remains sticky at all times, trapping airborne dirt and abrasive dust in the pores of the filter allowing the engine to breath only clean air. This is most important on dirty or sandy circuits where airborne particles could quickly ruin engine performance and cause costly failures. Filters correctly serviced with Race Foam Filter Oil will ensure engines remain in tune longer with increased maintenance intervals. Part No. Race Foam Filter Oil, 1ltr 90-540 MORRIS Brake / Clutch Fluid (DOT 4) • Dot 4 fluid for all applications • Product is blended with special additives that prevent fluid oxidation, rust and the swelling of the piston seals used in conventional brake systems • Exceeds manufacturer’s standards • Designed for use at high temperatures under the most severe conditions Part No. Brake / Clutch Fluid, 500ml 90-571
Foam Filter Cleaner is specially formulated for cleaning motorcycle foam filters. It is a ready for use, blue coloured emulsifiable fluid, blended from hydrocarbon solvents and a non-ionic detergent. The powerful degreasing action splits the bond between trapped dirt and oily matter, allowing the filter to be washed thoroughly clean with water. Foam Filter Cleaner is non-caustic and will not corrode metal parts. Additionally, it washes away cleanly without leaving any harmful or corrosive residues in the filter that could damage engines. Part No. Race Foam Filter Cleaner, 5ltr 90-541
90-540
90-541
MORRIS Race Super Cool Race Super Cool is a high performance monopropylene glycol antifreeze mixture, designed for use in high performance motorcycles, both on and off road under the most severe of racing conditions. Race Super Cool protects against corrosion, erosion, cavitation and other problems found in hard driven engines. Race Super Cool exhibits a low level of toxicity and comes pre-mixed with high purity deionised water, for ease of use. The use of de ionised water, as opposed to tap water, ensures there is no harmful lime scale build up in the coolant system. • It is a very effective antifreeze and protects all engines from frost damage right down to -33°C. • It does not allow rust or corrosion to take place with cast iron, aluminium, copper alloys, solder, or any other metals found in en - gine cooling systems and therefore prolongs the life of the engine components and heat exchangers. • It has no adverse effects on rubber hoses or gasket materials and will not cause leaks. • No need to drain at the end of the season, it lasts up to two years in service. Part No. Race Super Cool, 1ltr 90-590
90-571
90-590
MORRIS Workshop PRO Traffic Film Remover Originally developed in Scandinavia this unique combination of surface active agents, sequestrants and alkaline builders was designed to chemically remove road film from vehicles. This reduces the need for mechanical agitation and rapidly lifts dirt, grime and oil from painted surfaces. Features: • Effective at higher dilutions. • Easily and gently removes road dirt and grime. • Ideal for hot or cold pressure wash machines. • Effective in hard and soft waters. • Contains rinse off additive. • Biodegradable. • Dyed blue for product identification. • Safe on paint work, metal surfaces, glass and rubber. • Does not contain ingredients, which accelerate metal corrosion.
Part No. Workshop PRO Traffic Film Remover, 5ltr
90-595
90-595
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
F19
Made with FlippingBook - Online magazine maker