Rev2
Throttle Switches
Motion Pro Throttle Switches
• Model specific handlebar switch for use with Rev2 throttle ki t on bikes with ignition and starter switches in stock throttle assembly • Fits 7/8” bars (22.2 mm) • Extra narrow design is only 26 mm wide • Push In/Out engine switch • Momentary 2 pole starter switch • Model specific design with pre-wired connector is designed to plug into stock wire harness and duplicate OEM function • Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes
HONDA Models
KAWASAKI Models
SUZUKI Models
Years Part No. 2003 - 06 44-7480
Years Part No. 2008 - 12 44-7483 2013 - 17 44-7483 2009 - 11 44-7482 2012 - 16 44-7484 2015 - 16 44-7484
Years Part No.
CBR600RR
Ninja 250R Ninja 300R Ninja 650R Ninja 650R
GSXR 600 GSXR 600 GSXR 600 GSXR 750 GSXR 750 GSXR 1000
2004 2005
44-7486 44-7485
2006 - 07 44-7485
2004
44-7486
Ninja 650R ABS
2005 - 07 44-7485 2005 - 06 44-7485
KTM Models
YAMAHA Models
Years Part No. 2015 - 17 44-7481 2016 - 17 44-7481
Years Part No. 2015 - 18 44-7488 2003 - 05 44-7487 2006 - 09 44-7487
RC 200 (EU) RC 250 (EU)
YZF R3 YZF R6 YZF R6S
RC 390
2015 2016
44-7481 44-7481
RC 390 (Except EU Model)
44-7480
Revolver Replacement Parts
Revolver Replacement Throttle Tube • Replacement throttle tube for Motion Pro VR Throttle • Suitable for sportbike applications • Accepts all VR reels
12-252
Replacement Throttle Tube
Revolver Replacement Throttle Tube • Required for installation of Rev2 or Revolver Throttle Kit on bikes with ignition and starter switches in stock throttle assembly • Fits 7/8” bars (22.2 mm) • Extra narrow design is only 26 mm wide • Push In/Out engine switch • Momentary 2 pole starter switch • Starter switch has 2 separate circuits, one normally open, one normally closed for street bikes that use a headlight/starter cutoff • 550 mm long wiring harness with brake light switch circuit wiring • Brake light circuit wiring pigtail 120 mm long with female spade connectors • Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes • Wiring harness has bare, tinned wires without connector for easy installation of OE connector body Replacement Stop/Start Switch 44-747
12-252
44-747
Foot Note 134 - Special order only! Closed Course Race application only. Stock XR1200 uses 1” handlebar. Must use 7/8” handlebars. No replacement RH switch that features RH t/s,start/stop and start button. 140 - For use with stock throttle bodies/ carburetors and Rev2 throttle assembly only. IMPORTANT - The Rev2 throttle does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. Use of the Rev2 Throttle requires an after market kill switch and starter button assembly (pn 11-0098) not included in kit. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 142 - Off road Rev2 throttle kits require a minimum of 200 mm of handlebar length in order to provide sufficient clearance between Rev2 throttle housing and hydraulic brake lever. 143 - For use with stock throttle bodies. Rev2 throttle kit for BMW S1000RR. Vehicle production date range 09/08 - 03/12. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 144 - Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 145 - 01-2765 Rev2 throttle kit features throttle cable set 01-1270 that is 3 inches longer than throttle cable 01-1269 included in Rev2 throttle kit 01-2764. 146 - Rev2 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2 throttle. 147 - Designed to fit BMW S1000RR production date range 09/08 - 08/12. Rev2 cables can only be used with stock throttle bodies (or carburetor where applicable) and Rev2 throttle. 148 - 3 inches longer than standard length Rev2 throttle cable part number 01-1269. Rev2 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2 throttle.
*Please visit our website for current prices
E-mail: sales@oro2u.com
www.oro2u.com
D21b
Made with FlippingBook - Online magazine maker