Carburettor
Hot Start Plunger Kits
Allballs Hot Start Plunger Kits • Kit includes all necessary parts to rebuild the hot start plunger circuit. • Kit includes necessary o-rings, springs, retaining nut, boots and cable guide as necessary. • Hot start plungers can seize or can easily be lost during a carburettor rebuild. • Improperly functioning parts can cause hard starting or poor running conditions.
HONDA
Hot Start Plunger Kit
Models TRX 450R TRX 450R TRX 450R TRX 450R
Years
2004 - 05 18-7255.AB
2006 2007
18-7259.AB 18-7259.AB
2008 - 09 18-7259.AB
KTM
Hot Start Plunger Kit
Models
Years
SX 450 ATV SX 505 ATV SX 505 ATV
2009 - 10 18-7259.AB
2009 2010
18-7259.AB 18-7259.AB
27-606
27-605
honda Application
Choke Valve Kits Choke valve kits for the following:
Years
Oem Ref.
Part No.
TRX 300/FW TRX 300/FW
1988 - 93 1994 - 00
16046-HC4-840 16046-HM5-730 16046-HM5-730 16046-HM5-730 16046-HN2-003 16046-HM5-730 16046-HM5-730 16046-HM5-730 16046-HN2-003 16046-HN2-003 16046-HN2-003 16046-HN2-003 16046-HN2-003
27-605 27-606 27-606 27-606 27-608 27-606 27-606 27-606 27-608 27-608 27-608 27-608 27-608 27-608 27-608
kawasaki Application Years
TRX 350FE/FM TRX 350TE/TM TRX 400FA/FGA
2000 2000
Oem Ref. 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101 16016-1101
Part No.
KFX 250 Mojave
2001 - 04 1996 - 04 1996 - 05 1995 - 00 2001 - 03 1999 - 02 2003 - 09 2003 - 12 1996 - 99 1998 - 02 1997 - 04
18-7090 18-7090 18-7090 18-7090 18-7090 18-7090 18-7090 18-7090 18-7090 18-7090 18-7090
2004 - 07 1995 - 00 1998 - 00 1998 - 00 2001 - 02 2004 - 08 2009 - 14 2005 - 11 2005 - 06
Bayou 300
TRX 400FW TRX 450S TRX 450ES TRX 500FA
Bayou 300 4x4 Lakota 300 Lakota Sport
Prairie 300 / 300 4x4
TRX 500FGA TRX 500FPA TRX 500FE/FM TRX 500TM TRX 500FPE TRX 500FPM
Prairie 360
Prairie 360 4x4 Bayou 400 4x4
Prairie 400
2007 - 09 / 11 16046-HN2-003
Prairie 400 4x4
2008 - 11
16046-HN2-003
Banshee / Blaster Idle Kit • Used to install a standard Mikuni idle adjuster into the carburettor body. • For use on Yamaha Banshee and Blaster models. • Idle adjuster is necessary if carburettor top has been replaced with a standard Mikuni cap. • Kit includes a drill bit, thread tap, 2 idle screws with lock nuts and instructions. • Drill press or mill should be used to drill holes in the carburettor. Banshee/Blaster Idle Kit 27-045
27-045
Accelerator Pump Spring The Accelerator pump spring eliminates any wiring tricks that are out there and increases pressure on the pump diaphragm due to it being 50% stiffer then the stock ones. • Direct replacement for OEM spring. • Improved throttle response. • No need for any wiring on the accelerator pump. • Allows use of longer diaphragms. • Fits all motorcycles and ATV’s using an FCR carburettor. Accelerator Pump Spring 18-004
18-004
*Please visit our website for current prices E226
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
Made with FlippingBook - Online magazine maker