Maintenance & Performance
Exhaust
Athena Muffler Packing (Flat Mat) Due to an increasing number of customers requests, Athena offers now a phonoabsorbant material for exhaust silencers specifically developed to meet the highest needs for insonorization. This special fiberglass wool, designed for 2 and 4 stroke exhaust silencers with density of 2,6 g/cm3, can bear working temperatures up to 550°C and peak temperatures up to 800°C. Thanks to its physical features it resists back-drafts and prevents fiberglass stiffness caused by exhaust oils. 500x700mm sheet. Athena Muffler Packing Flat Mat. 34-101.ATH Muffler Packing (Flat Mat) This is the ideal packing for any muffler which when stripped, the core or baffle tube comes out with the end cap. The mat is then cut into strips the same width as the tube and wrapped around until the outer diameter is the same as the outer cover. To hold the mat in place while assembling, put tape around the packing. If it is an oval pipe, just cut some 25mm strips and put them on the top and bottom to build up the right shape. To acheive the best results ensure that the holes in the tube are clean from carbon and other dirt before wrapping your tube with the new mat packing wool. Muffler Packing Flat Mat. 34-100 Trade Pack of 50 34-100.PK/50 Trade Pack of 100 34-100.PK100
34-100
*Silencer core not included
34-101.ATH
Long Life Muffler Packing (Flat Mat) This new flat mat packing has been developed to withstand very high temperatures and resist against welding together which protects against noise increase. Used by 2 strokes and 4 strokes. Long Life Muffler Packing. 34-119.EA Trade Pack of 10 34-119.PK10
34-119
Muffler Packing Wool This is the best type of packing to use if your muffler leaves the core, or baffle tube in the pipe when your end cap is removed. To pack, just remove the old packing with a long hook and clean the baffle tube holes out with a wire brush. When repackaging do not ram it too tight, just firm. As you repack, keep an eye on the position of the end of your baffle tube, as the end cap will not fit back on if the baffle tube has gone off centre. Available in 200g or 500g bags. Muffler Packing Wool 200g 34-110.2.E Trade Pack of 10 34-110.2.PK10 Muffler Packing Wool 500g 34-110.5.E Trade Pack of 60 34-110.5.PK10
34-110
Metallic Heat Shield Exhaust Wrap Exhaust wrap metallic heat sheild. Insulated wire hose cover wrap loom tube. They can directly process 800 degrees up to 2000 degrees of radiation. Can withstand 500 °F direct continuous / 2000 °F radiant heat Convenient hook and loop design edge No need to remove wires and hose clips. Easily trimed to length Color: Black+Silver. Size 60cm x 10.6cm (2ft x 4.2” Approx) Metallic heat shield 34-1602.FIR
Fibreglass Cloth Header Wrap Helix Racing Products fibreglass cloth header wraps will keep the heart of your exhaust system warm and cozy. The fibreglass tape insulates exhaust pipes and maintains higher temperatures inside of the pipes, allowing fuel to burn better and creating greater horsepower. Helix Racing Products fibreflass cloth header wraps are available in different sizes. Take the easy road by putting the knowledge and expertise of Helix Racing Products fibreglass cloth header wraps to work for you. Can be used on 2 and 4 Stroke front pipes/headers. Wrap Colour: Tan. Exhaust Wrap 1” x 25ft 34-160.125 Exhaust Wrap 1” x 50ft 34-160.150 Exhaust Wrap 2” x 25ft 34-160.225 Exhaust Wrap 2” x 50ft 34-160.125
34-1602.FIR
34-160
Exhaust Wrap 50mm x 10M (Black) Exhaust Wrap 50mm x 10M (Off White) Exhaust Wrap 50mm x 10M (White)
34-1601.BK 34-1601.N 34-1601.WE
*Please visit our website for current prices E261
E-mail: sales@oro2u.com
www.oro2u.com
Made with FlippingBook - Online magazine maker