FLY WHEEL PULLERS
* For ATV and Road Flywheel Pullers please see Section E *
QUICK FIND SIZE CHART Flywheel Extractors with thread on outside of Extractors.
Flywheel Extractors with thread on inside of Extractors.
Size (mm) Thread Part No. 18x1.50 RH 00-087 18x1.50 RH 00-096 19x1.00 RH 00-099
Size (mm) Thread Part No. 20x1.50 RH 00-086 24x1.50 RH 00-236 25x1.00 RH 00-863 26x1.00 RH 00-081 26x1.00 RH 00-231 28x1.00 RH 00-407 30x1.00 RH 00-486 30x1.25 RH 00-7890 30x1.50 RH 00-093 30x1.50 RH 00-095 30x1.50 RH 00-7889 33x1.50 RH 00-864 35x1.00 RH 00-7887 35x1.00 RH 00-8481 35x1.50 RH 00-080 35x1.50 RH 00-376 38x1.50 RH 00-324 38x1.50 RH 00-375 40x1.50 RH 00-151 42x1.50 RH 00-7886 50x1.50 RH 00-133 50x1250 LH 00-7837 7/8”- 20 RH 00-8484 1”x 20 RH 00-8482 1-3/8”-18 RH 00-8483
19x1.50 22x1.50
RH
00-884
20x1.00
RH
00-132
22x1.50
RH
00-074
00-087
22x1.50
RH
00-131
24x1.00
RH
00-128
27x1.00
RH
00-097
27x1.00
LH
00-101
27x1.25
RH
00-102
26x1.00
RH
00-851
26x1.00
RH
00-124
26x1.50
RH
00-104
28x1.00
RH
00-105
00-096.B
28x1.50
RH
00-125
28x1.50
RH
00-127
28x1.50
RH
00-129
33x1.50
RH
00-106
Flywheel Extractors, Bolt Type.
Size (mm) Thread Part No. 14x1.50 RH 09-2000 16x1.50 RH 00-027 18x1.50 RH 00-026 20x1.50 RH 00-085 20x1.50 RH 00-094
00-097
FLY WHEEL PULLERS This tool enables you to pull a flywheel from the crankshaft or rotating assembly. Tips on use; • Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in • Use copper grease on the puller threads for long life • Make sure the puller is fully screwed into the flywheel • After tightening, use a hammer on the centre and tap to jolt free (not always needed) • If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to the flywheel
00-127
00-131
00-376
00-486
00-7887
09-2000
00-884
Sample Image of a Flywheel Puller Working
* Please Visit website for full flywheel fitment listings *
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
B17
Made with FlippingBook - Online magazine maker