VALVE TOOLS - 4 STROKE
MUTLI VALVE TOOL (FIR) Used to install valve spring keepers. Replaces the large cumbersome valve spring compressor. The small tool is designed to fit valves of 4- and 5-valve-per-cylinder heads (5.5mm valve stem diameter or smaller). The larger tool is designed to fit the vales of 4-valve-per-cylinder heads (5.5mm valve stem diameter or larger under 40lbs. seat pressure). Will dramatically reduce the time necessary to replace valves in modern 16- to 20-valve heads.
FIR Multi Valve Tool (Small) FIR Multi Valve Tool (Large)
00-177 00-178
00-178
00-177
00-178 Working
VALVE GUIDE DRIVERS (K&L)
Used for the removal and installation of valve guides into the cylinder head. 4.5mm 00-537 5.0mm 00-538 5.5mm 00-539 6.0mm 00-540 7.0mm 00-541 8.0mm 00-542
00-538
VALVE GUIDE DRIVERS (FIR)
Designed to remove and install cast iron or solid bronze valve guides easily. Constructed from a special heat-treated alloy steel for long life and durability.
5mm/5.5mm 5mm/5.5mm
00-5361.FIR.A 00-5361.FIR.B 00-5361.FIR.D50 00-5361.FIR.D55 00-5361.FIR.D60 00-5361.FIR.D65 00-5361.FIR.D70 00-5361.FIR.D80
5.0mm 5.5mm 6.0mm 6.5mm 7.0mm 8.0mm
00-5361.FIR.A
00-5361.FIR.B
VALVE GUIDE FLEX HONES (320 GRIT) (K&L) Flex-Hone tools create a cross-hatch finish on the ID of the valve guide bore for better oil retention and less wear on both the valve guide and the valve stem. Recommended RPM: 800 - 1200. Remember, Flex-Hone tools are designed to be used with Honing Oil or and oil based lubricant. Never use solvents with your Flex-Hone as it will degrade the adhesive bonds in the tool.
5.0mm 5.5mm 6.0mm 7.0mm 8.0mm
00-543 00-544 00-545 00-546 00-547
00-543
VALVE GUIDE REAMERS (K&L) Reaming valve guides after installation assures a proper valve stem to valve guide fit.
5.0mm 5.5mm 6.0mm
00-548 00-549 00-551
00-548
VALVE GUIDE REAMERS (FIR)
This product is the guide rod of the QM universal valve seat reamer, which is made of high- quality imported bearing steel materials, with sophisticated processing technology and durable. The guide rod is inserted into the guide tube when processing the valve seat ring and processed with a blade to find the center
4.5mm 5.0mm 5.5mm 6.0mm 7.0mm 8.0mm
00-5362.FIR.D45 00-5362.FIR.D50 00-5362.FIR.D55 00-5362.FIR.D60 00-5362.FIR.D70 00-5362.FIR.D80
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
B29
Made with FlippingBook - Online magazine maker