CARBURETTOR TOOLS
CARBURETTOR TOOL SET Contains longer bits for reaching into recessed cavities to adjust Keihin FCR carburettors. Ideal for trail riders and garage mechanics alike. Kit includes 6mm hex for main jets, long- reach straight slot for pilot jets & a 3mm hex for float bowl removal. Cap compartment will hold a few spare main jets.
Dirt Racing Carburettor Driver Tool Set
00-116.DR
Motion Pro Carburettor Driver Tool Set
00-116.MP
00-116.DR
00-116.MP
MINI ‘T’ CARBURETTOR TOOL (Motion Pro) This Mini-T Carb Tool is designed to fit into your bumbag to take care of those “on the trail” jet changes. This unit has a #2 Phillips bit, #1 Straight slot bit and a 6mm hex socket as well as storage for 3 main jets. Specifically designed for 4-strokes, so you can access your jets without the need to remove the carb. Will also work with many 2-stroke models.
Motion Pro Mini T Carb. Tool
00-797
00-797
90 ° PILOT SCREWDRIVER • Designed for those hard-to-reach air/fuel mixture screws on most multi-cylinder motorcycles • Straight-slot blade tip can be rotated by rotating the handle • Length is 17 inches with a 110 degree angled head to extend reach 1 inch • Tip height is adjustable, and can be set in place during use • Metal shaft with knurled grip area and hard plastic handle
00-137.MP
FIR 90 ° Pilot Screwdriver
00-137.DR
Motion Pro 90 ° Pilot Screwdriver
00-137.MP
00-137.MP
CARBURETTOR ADJUSTER DRIVER (FIR) • Carburettor mixture adjuster drive, made from alloy steel S45C • Works with Mikuni or Keihin carburettors • 8mm hex nut and screwdriver slot adjusting bolt • 11 inches [280mm] long • Makes adjusting your hard to reach mixture screws easy
00-051.FIR
Carburettor Screwdriver
00-051.FIR
CARBURETTOR JET WRENCH Fits Mikuni and Keihin hexagon style main jets. Compact wrench allows you to take jets out with the carburettor still on the bike.
Motion Pro 6mm Hex Wrench Holder
00-157
Fits Mikuni and Keihin hexagon style main jets. Compact wrench allows you to take jets out with the carburettor still on the bike. Made from high impact nylon. Two finger lug, no need
for any other tools. Red only. 6mm Hex Wrench Holder
00-158
00-566.DR
Fits 6 and 8mm round jets, and 6mm hex jets. Made from steel, with a zinc plated finish. 2 Piece Wrench Kit 00-566.DR
00-157
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
B36
Made with FlippingBook - Online magazine maker