Calibrations
Digital Hall Sensor Calibration (Fold and Flip Models Only) Whenever the screen is replaced, the digital hall sensor must be calibrated to guarantee optimized digital hall sensor performance for devices that have it. Digital hall sensor calibration is available through the Self Repair Assistant app. • This feature may not be available depending on the model. The availability of this feature can be automatically checked in the Self Repair Assistant app, so please follow the guidance of the Self Repair Assistant app. • For Fold models : If the main screen does not turn on after being replaced (the main screen is off and the cover screen is on when the device is unfolded), follow the steps below to perform digital hall sensor calibration. The boot screen (the screen where the Samsung and carrier logos appear) will appear normally and then turn off, so it is not a hardware failure. 1) Fold the device and launch the Self Repair Assistant app on the cover screen. 2) Move to the digital hall sensor calibration screen, unfold the device, and then press the Volume Up button or the Volume Down button. 3) You will hear a vibration, and the calibration will be performed automatically. When calibration is complete, the main screen will turn on normally. • For Flip models : If the main screen does not turn on after being replaced (the main screen is off and the cover screen is on when the device is unfolded), follow the steps below to force the main screen to turn on and perform digital hall sensor calibration. The boot screen (the screen where the Samsung and carrier logos appear) will appear normally and then turn off, so it is not a hardware failure. 1) Connect the USB cable to the device, and connect the other end of the USB cable to the USB power adapter or your computer. 2) While pressing and holding the Side button, press the Volume Up button once and the Volume Down button twice. 3) When the main screen turns on, perform digital hall sensor calibration.
45
Made with FlippingBook interactive PDF creator