Disassembly and Assembly
14 Remove all adhesive tapes and these tapes on the back cover ( ). Remove the adhesive tape of microphone hole on back of device. Using your finger or tweezers, remove all adhesive tapes on back cover. • Be careful not to put your fingertips or any foreign objects on the rear camera or back cover lens ( ). • Make sure to remove any residual tape ( ) attached to the inside of the back cover before reassembling the device.
• During removal, be careful not to damage the near components. Apply additional heat if you are having trouble separating the adhesive.
After you finish disassembling, refer to Back Cover Assembly for how to reassemble.
68
Made with FlippingBook interactive PDF creator