Disassembly and Assembly
2 Before the heat cools with the heating bag applied, remove the adhesive bonding between the front camera and the display module using the ejection pin. • Be careful not to damage the front camera and near components. • As the adhesive securing the camera is very strong, work slowly. • Be careful not to touch the ejection pin on the side of the camera. If you have trouble removing the adhesive, heat the microwaveable heating bag additionally, and apply it to the front camera module to further soften the adhesive. When reheating, it should be heated no longer than 30 seconds.
80
Made with FlippingBook interactive PDF creator