Maintenance
Tools
Pipe Repair Exhaust Blow Out Kit
Dents in your pipe will reduce your r.p.m. power. E.G., A dent the size of an egg on the bottom bend of your pipe will restrict gas flow and cost you approximately 2 to 4 BHP!!! Don’t throw your dented pipe away, as this is a super kit. It will enable you to remove the dents without cutting or hammering, small or large dents, anywhere on the pipe. The multi clamp is fully adjustable and fits any model pipe, standard or performance. Easy to use and fits in minutes. KIT COMES WITH BOTH MULTI CLAMPS AND SEALS, ONE WITH THE INPUT VALVE FITTED. ALL FULLY ADJUSTABLE TO FIT ALL PIPES. Exhaust Blow Kit 00-450 Trade Pack Of 6 00-450.PK/6
Cable Lubricator
Used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated. Use WD40, GT85 or Cable Life spray. Cable Lubricator 00-990.EA Trade Pack Of 10 00-990.PK/10 Trade Pack Of 50 00-990.PK/50 Replacement Rubber Seal Oiler 00-990R
Hydraulic Cable Lubricator
Hydraulic cable lubricator, ideal for use on both clutch and brake cables. Cable is sealed in end of lubricator with oil, the oil is then forced all the way down the cable by turning the screw. Hydraulic Cable Lubricator 00-600
Engine Timing, Degree Wheel (TDC) Manufactured from .052” thick aluminium with a 6¾” outside diameter and a 6mm centre hole. Black anodised finish. Easy to read. Check or set ignition and/or cam timing. May be used on 2 & 4 stroke engines. Degree Wheel (TDC) 00-172
Forged Spoke Key 6 In One
A quality spanner suitable for workshop use or in a bumbag. 3 sizes on each end: 5.6, 5.7, 6, 6.3, 6.6 and 6.8mm. Forged Copy 6 in 1 00-630 Trade Pack Of 10 00-630.PK10
Feeler Gauges
Spoke Key 6 In One
Feeler Guages. Carbon Steel 0.05 - 1.0mm. 13mm x 100mm (1/2” x 4”) blades. Hardened and polished, individually marked with size. Feeler Gauges. Metric set 00-881
6-In-1 Spoke Key. Suitable for workshop use or in a bumbag. 3 sizes on each end. 6 In 1 Spoke Key 00-640 Trade Pack Of 10 00-640.PK/10
Carb Cleaner Set
A 10 piece wire set with spiral knurling for cleaning popular sizes of jets and carb body holes and passages. Carb Cleaner Kit 00-462 Trade Pack Of 10 00-462.DR/PK10
Dirt Racing Auxiliary Tank
For use when engine tuning, with the tank off the bike. Includes 4ft of 1/4” fuel line and an 1/4” in-line fuel barb. Tank can also be used for re-filling transmission oil on some late model mx bikes. Holds up to 1000cc. Auxiliary Tank (DR) 00-032.DR
Foot Pump 0-100psi
Foot pump with a pressure gauge and flexible lead. Folds up neatly to store away until needed. Foot Pump. 00-883
*Please See Our Tools Catalogue For Full Range Of Products
E-mail: sales@oro2u.com
www.oro2u.com
A7
Made with FlippingBook - Online magazine maker