Tools
Side Case Puller (Motion Pro) • Used to remove the right side-case cover
• Designed to work with 1970 to 1999 Big Twin models excluding 1999 Twin Cam’s, 1995 to 2002 Buell models and 1990 and up Sportster models • Includes bracket, puller bolt and set screws
Motion Pro Side Case Puller
00-8087
00-8087
Valve Seal Installation Kit • The Installation tools for OE style seals are manufactured from high strength 6061-T6 Aluminum for increased durability when compared to plastic installers • Precision fitment onto the seal OD to help the builder center the seal over the valve guide so that a few light strikes from a hammer will set the seal • Radiused top striking surface reduces the likelihood of a burr forming from deformation • Each installation tool is color coded and laser marked for each seal size by guide diameter • Fits many Harley Models. (Please see website for full fitments listing)
00-9997.KW
Kibblewhite Valve Seal Installation Kit
00-9997.KW
00-9997.KW Working
Cam Bearing Remover Once the camshafts are removed from the support plate, this tool will remove the bearing from the camshaft. Unlike a general purpose puller, this tool was designed to remove the bearing straight, with no slipping or binding. Fits all Twin Cam 88.
K&L Cam Bearing Remover
00-1909.KL
00-1909.KL
Transmission Cover Bearing Remover/Installer This tool will remove and replace the transmission door bearings. It can also be used to remove the transmission door for replacement without removing the complete transmission assembly. Door bearings must be replaced if using this tool to pull door off case.
K&L Transmission Cover Bearing Remover / Installer
00-1909.KL
00-1910.KL
*Please visit our website for current prices
H92
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
Made with FlippingBook - Online magazine maker