Tools
Fork Spring Compressor Kit (Motion Pro) • Designed to install fork caps on forks with a large amount of spring pre load • Will work on most 39mm and 41mm Harley forks • Reduces risk of damage to fork caps during installation
Motion Pro Fork Spring Compressor Kit
00-8083
00-8083
Fork Spring Tool (Motion Pro) Motion Pro Fork Spring Tool for Harley. Assists in the disassembly and assembly of springer-type front forks.
Motion Pro Fork Spring Tool
00-8085
00-8085
Fork Cap Socket (Motion Pro) • Use for removal and installation of the fork cap nut (1 3/8” hex) • Fits most Big Twin and Sportster models
• Thin socket measures only 9/32” deep by 5/8”. tall • O-ring insert to help protect the top of the cap • Sold each
Motion Pro Fork Cap Socket
00-8084
00-8084
00-8084
Fork Oil Level Gauge (Motion Pro) Motion Pro Fork Oil Level Gauge. • For checking and adjusting the oil level on all conventional and single chamber cartridge forks • Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm incre- ments • Syringe has a capacity of 60ml • Can be used on bicycles equipped with front suspension • Replaces HD-590000-B, Buell® tool B-590000-B and Indian® OEM #PV-59000A
00-802.MP
Motion Pro Oil Level Gauge
00-802.MP
00-021.EA Working
Push Rod Tool (Motion Pro) • Designed to remove and install the clip on Harley collapsible push rod tubes • Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer • No more cut knuckles & scratched engine parts from using a screwdriver between the fins •
Motion Pro Push Rod Tool
00-8088
00-8088
00-8088 Working
*Please visit our website for current prices
H96
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
Made with FlippingBook - Online magazine maker