ORO2U Tools Catalogue - Section E - Specialist Tools

KTM SPECIALIST TOOLS

ENGINE TOOLS

CRANKSHAFT MOUNTING TOOl • Fits; KTM 300/250 SX, MXC, EXC, EGS • Crankshaft mounting tool Specifically designed for KTM crankshaft assembly • Fits crankshaft smoothly without damage to crankshaft or bearings • Overall length of tool is 146mm and constructed from carbon steel • Fitting face is O.D. 70mm x I.D. 43.5mm / 3.5mm depth • Long bolt end is Dia. M12 x 1.25mm with drive hole Instructions; Sometimes the final assembly is done with a cold crankcase and a puller tool. This tool uses a long nut / stud to connect to the crankshaft end and a thick tube that allows you to pull the crankshaft through the main bearing without damage. By only pushing on the inner bearing race no damage to bearings will occur . Assembly is the same only you don’t heat the crankcase. You pull the crankshaft through the bearing and this slides the two crankcases together.

00-8100

Crankshaft Mounting Tool

00-8100

00-8100 Working

00-8099

LOCATING DRUM BRACKET TOOL • KTM Locating Drum Tool. This special tool is designed to hold the location drum to prevent damage to the parts while disassembling and assembling the engine • Constructed from high quality steel with a zinc plated finish • 5mm thick x double hex 35.5 / 39mm

Fits; KTM

• • •

125/200 Models 1997 - 2010

150 SX 2009

144 SX 2007 / 2008

Locating Drum Bracket Tool (KTM Part No. 5032903800)

00-8099

00-8099 Working

PRIMARY GEAR HOLDER • Primary Gear Holder •

It fits 70mm diameter gears with 33 teeth

• This tool helps you to hold the primary gear while disassembling and assembling the engine without damage to the parts • Works on KTM Motorcycles

Primary Gear Holder

09-1050

PRIMARY GEAR HOLDER (FIR) • Primary Gear Holder • It fits 46mm diameter gears with 23 teeth • This tool helps you to hold the primary gear while disassembling and assembling the engine without damage to the parts • Works on KTM Motorcycles 1998-on

09-1050

09-1050 Working

FIR Primary Gear Holder

09-1051

09-1051

PRIMARY GEAR WHEEL BRACKET TOOL Special tool for primary gear wheel. Fits; KTM • 1994-95 440 E-XC • 1996 550 MXC

Primary Gear Wheel Bracket Tool

00-8063

00-8063

WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES

CALL: 01597 822 666

E37

Made with FlippingBook - Online magazine maker