ATV BALL JOINT TOOLS
BALL JOINT REMOVER / INSTALLER 9 piece kit , Used to remove and install the lower ball joints on Polaris ATV and side x side models with pressed-in ball joints on the front strut casting. Ball joint install adapter X 1PC, Foring screw x 1 pc 1/4”-20 X 70L Screws X 2PCS, 1/4”-20 X 50L Screws X 2PCS, 3/4”-16 X 16L X 28H Nut X 1PC, Puller plate X 1PC, Receiving cup X 1PC, T
To see how to use this tool kit see youtube video. https://www.youtube.com/watch?v=I5h6e1zB6G0
Tips on how to use. • The tall black collar sets on first, then the round spacer with the two holes • The two small bolts tighten these down • Nut slips over the big bolt, bolt goes through the hole and tightens onto the OEM ball joint end as far as it can go • Hold the bolt and tighten the nut and the ball joint will pull out
00-7934.DR
Ball Joint Remover / Installer
00-7934.DR
BALL JOINT SEPARATOR FORK •
Used for separating pitman arms, tie rods and ball joints Drop Forged heat treated steel with Zinc plated finish Ideal for ATVs / UTVs / automotive and light industrial motors Perfect For Removing Ball Joints, Track Rod Ends Etc
• • • • •
Opening: 24mm; length:300
The steering is knukled, for good grip
• The Tool has hardened end for use with hammer to separate the most stubborn parts with ease
Ball Joint Separator
00-497
00-497
00-497 Working
BALL JOINT SEPARATOR (FIR) Knuckle/Ball Joint Tool Will not damage the A-arm, ball-joint stud or rubber boots Complete with instructions Item 08-0120 includes 08-0154 08-0154 also available separately and can be used to retrofit earlier versions (1998 and earlier) of the 08-0120 tool Designed to work on the following ATV models Honda TRX250R 86-89, TRX250X 87-88/91-92, TRX250 Recon 97- 01, TRX300EX 93-01, TRX450R 04-08, TRX450ER 06-08 Yamaha YFZ350 87-06, YFM350X 87-04
FIR Ball Joint Separator
00-033.FIR
Motion Pro Optional Bolt
00-034.MP
00-033.FIR
00-033.FIR Working
00-033.FIR
UNIVERSAL BALL JOINT PULLER • Excellent quality Heavy duty drop forged steel universal ball joint puller. • Adjustable Jaw capacity up to: 20 mm. Reach: 50 mm, Length: 270 mm • Special tool for removing the ball pivots on steering arms, steering tie rod, steering knuckles, etc. • Drop forged steel chrome vanadium, with Silver BPZ finish.
00-499.E Working
Universal Ball Joint Puller
00-499.E
00-499.E
WEB: ORO2U.COM PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
E53
Made with FlippingBook - Online magazine maker