Ultra-Precision Tooling Grade SUMICRYSTAL UP (Half-Cut Product)
■ General Features SUMICRYSTAL UP Half Cut products are materials for holders consisting of the UP Economy type material cut in half along the (100) or (110) faces.
■ Features (1) Grinding during tool production minimizes the volume removed, reducing machining loss. (2) Similar shape to the completed tool, reducing material costs. (3) The cut surface is a smooth laser surface.
M
■ Type cut along (100) face
■ Type cut along (110) face
Cutting position (100)
Cutting position (110)
■ Standard Cat. No. (Type Cut Along (100) Face) Dimensions (mm)
■ Standard Cat. No. (Type Cut Along (110) Face) Dimensions (mm)
C
øD Minimum
øD Minimum
Shape
Cat. No.
Stock
T
Shape
Cat. No.
Stock
T
guaranteed dimensions
guaranteed dimensions
UP 2010 (100) 1/2 UP 2012 (100) 1/2 UP 2510 (100) 1/2 UP 2512 (100) 1/2 UP 2515 (100) 1/2 UP 3010 (100) 1/2 UP 3012 (100) 1/2 UP 3015 (100) 1/2 UP 3510 (100) 1/2 UP 3512 (100) 1/2 UP 3515 (100) 1/2 UP 4010 (100) 1/2 UP 4012 (100) 1/2 UP 4015 (100) 1/2 UP 4020 (100) 1/2 UP 4510 (100) 1/2 UP 4512 (100) 1/2 UP 4515 (100) 1/2 UP 4520 (100) 1/2 UP 5010 (100) 1/2 UP 5012 (100) 1/2 UP 5015 (100) 1/2 UP 5020 (100) 1/2
UP 2010 (110) 1/2 UP 2012 (110) 1/2 UP 2510 (110) 1/2 UP 2512 (110) 1/2 UP 2515 (110) 1/2 UP 3010 (110) 1/2 UP 3012 (110) 1/2 UP 3015 (110) 1/2 UP 3510 (110) 1/2 UP 3512 (110) 1/2 UP 3515 (110) 1/2 UP 4010 (110) 1/2 UP 4012 (110) 1/2 UP 4015 (110) 1/2 UP 4020 (110) 1/2 UP 4510 (110) 1/2 UP 4512 (110) 1/2 UP 4515 (110) 1/2 UP 4520 (110) 1/2 UP 5010 (110) 1/2 UP 5012 (110) 1/2 UP 5015 (110) 1/2 UP 5020 (110) 1/2
1.0 1.2 1.0 1.2 1.5 1.0 1.2 1.5 1.0 1.2 1.5 1.0 1.2 1.5 2.0 1.0 1.2 1.5 2.0 1.0 1.2 1.5 2.0
1.0 1.2 1.0 1.2 1.5 1.0 1.2 1.5 1.0 1.2 1.5 1.0 1.2 1.5 2.0 1.0 1.2 1.5 2.0 1.0 1.2 1.5 2.0
2.0
2.0
D
2.5
2.5
S
3.0
3.0
T
3.5
3.5
øD
øD
T
T
V
4.0
4.0
W
4.5
4.5
5.0
5.0
*1 Sizes other than those indicated above can be ordered. Blank: Made-to-order item *2 Fine impurities, chipping, etc. within Sumitomo's prescribed range may be present in the minimum guaranteed dimensions of these products. *3 Impurities, chipping, etc. outside the inspection range may be present outside the minimum guaranteed dimensions of these products. *4 Some products have ground top surfaces.
*1 Sizes other than those indicated above can be ordered. Blank: Made-to-order item *2 Fine impurities, chipping, etc. within Sumitomo's prescribed range may be present in the minimum guaranteed dimensions of these products. *3 Impurities, chipping, etc. outside the inspection range may be present outside the minimum guaranteed dimensions of these products. *4 Some products have ground top surfaces.
M33
Made with FlippingBook flipbook maker