FASTENERS 11 Rivets & Anchors
NUT SERTS — KNURLED LARGE FLANGE
Material: POP ® Rivet Nuts are ideal where irregular holes are a problem. The large flange construction combined with the axial knurls on the body ensure a torque-resistant fit. • Large Flange Head • Knurls create high torque-out valves and resist spinning due to cross-threading or over tightening. • Blind installation - no access to backside required. • Outer flange is nearly flush with surface when installed. • Open end Type C-1010/C-1008 Steel
F
Completed Application
L
1
D
Plating:
Yellow Zinc
INCH SIZES
Installation Tool*
Thread Size
Grip Range .020-.080 .020-.130 .020-.130 .027-.165 .027-.165 .027-.165 .027-.165
Hole Size 17/64 19/64 19/64 25/64 25/64 17/32 17/32
Part No. K43.5020 K43.5030 K43.5040 K43.5050 K43.5060 K43.5070 K43.5090
‘D’
‘F’
‘L’
8-32
.265 .296 .296 .390 .390 .530 .530
.375 .400 .400 .500 .500 .670 .670
.460 .515 .515 .620 .620 .735 .735
A,B,E
10-24 10-32 1/4-20 1/4-28 5/16-18 3/8-16
A,B,C,E A,B,C,E A,B,C,E A,B,C,E
C C
METRIC SIZES
Thread Size M4 x .7 M5 x .80 M6 x 1.0 M8 x 1.25 M10 x 1.50
Grip Range
Hole Size
‘D’
‘F’
‘L’
Installation Tool* Part No.
K43.5110 K43.5120 K43.5130 K43.5140 K43.5150
.5mm - 2mm .5mm - 3.3mm .7mm - 4.2mm .7mm - 3.8mm .7mm - 1.50mm
6.75mm 7.6mm 10.0mm 13.5mm 13.50mm
6.73mm 7.55mm 9.90mm 13.45mm 13.45mm
9.91mm 10.10mm 12.7mm 17.0mm 18.8mm
10.67mm 13.10mm 15.75mm 18.65mm 21.60mm
A,F
A,B,D,F A,B,D,F
D D
*See threaded insert tool section
THREAD REPAIR — THREADSERTS ®
Threadserts ® are designed to install threads into any thickness of stock, including metal, plastic, fiberglass, or any rigid material. Ideal for solid stock applications. • Blind installation - no access to backside required.
• Finished repair is nearly flush with surface. • Thread Sert ® kit available: Part No. K47.250 • Open end
Materials:
Aluminum and Steel
Completed Application
U.S. THREADS
Steel Part No. K46.06.32 K46.08.32 K46.010.24 K46.010.32 K46.014.20 K46.0516.18 K46.038.16
Thread Size
Hole Size
Drill Hole
‘D’
‘A’
Installation Tool* Aluminum Part No.
A
K46.6.32 K46.8.32 K46.10.24 K46.10.32 K46.14.20 K46.516.18 K46.38.16
6-32 8-32
.221 .250
#2
.215 .246 .277 .277 .372 .496 .559
.375 .375 .375 .375 .510 .615 .740
A,B,E A,B,E
1/4
10-24 10-32 1/4-20 5/16-18 3/8-16
.2812 .2812 .3906
9/32 9/32
A,B,C,E A,B,C,E A,B,C,E
D
25/64
.500
1/2
C C
.5625
9/16
*See threaded insert tool section
THREAD INSERT SETTING TOOLS
THREADSETTER TOOL & COMPONENTS (FOR RN-1 TOOL)
Inch Sizes Mandrels Mandrel 6-32 Nose Piece 6-32 Mandrel 8-32 Nose Piece 8-32 Mandrel 10-24 Mandrel 10-32 Mandrel 1/4-20 Mandrel 1/4-28 * Mandrel 5/16-18 * Mandrel 3/8-16 *
Metric Sizes
Part No. K47.1.632 K47.632 K47.1.832 K47.832 K47.1.1024 K47.1.1032 K47.1024 K47.1420 K47.1.1420 K47.1.1428 K47.1.51618 K47.1.3816
Mandrels Mandrel M4 Nose Piece M4 Mandrel M5 Nose Piece M5 Mandrel M6 Nose Piece M6
Part No.
K47.1.4
K47.0700
K47.4
(A)
K47.1.5
K47.5
K47.1.6
• For Threadsert, Rivet Nut & Nut Sert installations (see tool application chart) • Pulls aluminum & steel inserts • Complete with 8-32, 10-24 and 10-32 mandrels and nosepieces • Other mandrels and nose pieces sold separately • Aluminum alloy body and drop forged steel upper handles • RN-1 Tool
K47.6
Nose Piece 10-24/10-32 Nose Piece 1/4-20 & 1/4-28
* Nose piece not needed
THREADSERT COMPONENTS FOR DISCONTINUED MARSON TOOL
(Part No. F39200)
Inch Sizes
Metric Sizes
Mandrels Mandrel 6-32 Nose Piece 6-32 Mandrel 8-32 Nose Piece 8-32 Mandrel 10-24 Mandrel 10-32 Mandrel 1/4-20* Mandrel 1/4-28* Mandrel 5/16-18* Mandrel 3/8-16*
Part No. K47.0701 K47.0702 K47.0703 K47.0704 K47.0705 K47.0706
Mandrels Mandrel M4 Nose Piece M4 Mandrel M5 Nose Piece M5 *Mandrel M6 *Mandrel M10
Part No. K47.0709 K47.0710 K47.0711 K47.0712 K47.0713 K47.0715
K47.0707 K47.0708 K47.07081 K47.00709 K47.007010
Nose Piece 10-24/10-32
* Nose piece not needed
Copyright © 2025
1-11-6
Made with FlippingBook - professional solution for displaying marketing and sales documents online