FASTENERS Rivets & Anchors 11
ANCHORS — HOLLOW WALL
Hollow Wall Anchors expand inside the wall cavity to provide a large bearing area for load transfer. Standard hollow wall anchors require drilling a hole for installation. Drive type hollow wall anchors do not require a pre-drilled hole for installation. Use them in standard gypsum drywall, plaster, or paneling. Material: Expander shell-Cold-rolled steel
1
STANDARD HOLLOW WALL ANCHORS Size Hole Size Wall Thickness Part No. 1/8XS 5/16 1/16 — 1/4 K22.01.1814 1/8S 5/16 1/8 — 1/2 K22.01.1812 1/8L 5/16 5/8 — 7/8 K22.01.1878 1/8XL 5/16 1-1/4 — 1-1/2 K22.01.18112 3/16S 3/8 1/8 — 1/2 K22.01.31612 3/16L 3/8 5/8 — 1-3/16 K22.01.3161316 1/4S 7/16 1/8 — 1/2 K22.01.1412 1/4L 7/16 5/8 — 1-3/16 K22.01.141316
Installation: Standard Hollow Wall Anchors
• Drill hole using the specified diameter drill bit • Tap anchor into hole until flush with surface
• Tighten screw while maintaining constant pressure on the anchor to set • Remove screw, install screw through fixture, reinsert screw into anchor body and tighten until snug against base material
DRIVE-TYPE HOLLOW WALL ANCHORS Size Wall Thickness Part No. 1/8 SD 1/8 — 1/2 K22.010.1812 1/8SLD 1/8 — 1-3/16 K22.181316
Drive-type Hollow Wall Anchors • Drive anchor into gypsum drywall until head is flush with surface • Tighten screw to set anchor • Remove screw, install screw through fixture, reinsert screw into anchor body and tighten until snug against base material
ANCHORS — TOGGLE BOLTS
Round Head Part No. K24.1.1820 K24.1.1830 K24.1.1840 K24.1.3130 K24.1.3140 K24.1.3150 K24.1.3160 K24.1.1430 K24.1.1440 K24.1.1450 K24.1.1460 K24.1.5640 K24.1.5650 K24.1.5660 K24.1.3830 K24.1.3840 K24.1.3850 K24.1.3860
Mushroom Head Part No. K24.2.1820 K24.2.1830 K24.2.1840 K24.2.3130 K24.2.3140
Screw Size 6-32 x 2 6-32 x 3 6-32 x 4 10-24 x 3 10-24 x 4 10-24 x 5
Size
Part Number Includes Screw and Wing
1/8 x 2 1/8 x 3 1/8 x 4 3/16 x 3 3/16 x 4 3/16 x 5 3/16 x 6 1/4 x 3 1/4 x 4 1/4 x 5 1/4 x 6 5/16 x 4 5/16 x 5 5/16 x 6 3/8 x 3 3/8 x 4 3/8 x 5 3/8 x 6
10-24 x 6 1/4-20 x 3 1/4-20 x 4 1/4-20 x 5 1/4-20 x 6 5/16-18 x 4 5/16-18 x 5 5/16-18 x 6 3/8-16 x 3 3/8-16 x 4 3/8-16 x 5 3/8-16 x 6
K24.2.1430 K24.2.1440
K24.2.1460
Use in: Block, wallboard, plaster, hollow tile Use with: No other fastener needed Made of: Steel, zinc plated
To Install: Drill hole completely through wall. Insert bolt through item to be fastened, attach wings,fold wings completely back, then push through hole until wings are against inside wall. Tighten with screwdriver. Original and replacement bolts are equipped with a combo-style head.
ANCHORS — TOGGLE WINGS
Make your own size by ordering wings and any coarse thread machine screw
Screw Size
Part No
Size
K25.18 K25.316
1/8
6-32
3/16
10-24 1/4-20 5/16-18 3/8-16
K25.14
1/4
K25.516 K25.38
5/16
3/8 1/2
K25.12
1/2-13
ANCHORS — PLASTIC TOGGLES
• A one piece anchor that takes screws from #6 through #12
Use in: Wallboard, plaster Use with: Sheet metal screws #6 - #12 Made of: Plastic
Panel Thickness
Hole Size
Screw Size #6 - #12 #6 - #12 #6 - #12
Part No
0 - 1/4 * 3/8 - 1/2
K24.11.14 K24.11.38 K24.11.58
5/16 5/16 5/16
5/8
*Mini style plastic toggle
Copyright © 2025
1-11-11
Made with FlippingBook - professional solution for displaying marketing and sales documents online