FASTENERS 11 Rivets & Anchors
ANCHORS — TOGGLERS
Toggler Brand Toggle Bolts
Hole Size
Screw Size #10-24 1/4-20 3/8-16
Vendor Part #
Part No
Size
K24.010.316 K24.010.14
3/16
1/2 1/2
25013 25014 21015
1
1/4 3/8
3/4 K24.010.38 SNAPTOGGLE toggle bolts for Maximum strength & precise Alignment in:
• Hollow Brick • Cement Board • Drywall • Fiberglass
• Cinder Block • Hollow Brick • Plaster • Boat Docks
• Concrete Block • Stucco • Composite Panels • Paneling
ANCHORS — EZ TOGGLES
1.
Place #2 Phillips screwdriver into recess of E-Z Toggle. Press into drywall while turning the anchor clockwise until it is seated flush with wall and arrows on head are parallel to stud. Place fixture in position over installed E-Z Toggle. Insert screw and push through E-Z Toggle to engage clamp. Continue turning screw until tight. The clamp will move back against the drywall as the screw is turned.
2.
3.
• Self-drilling into 3/8”, 1/2” and 5/8” wallboard • Maximum fixture thickness: 1/2” • Overall length: 2-1/2”
Description
Part No.
K03.4
EZ Toggle w/ #8 2-1/8 Pan Head SMS
ANCHORS — TITEN TURBO
HEX HEAD
ANSI Drill Size
Hex Bit Size
Part No.
D
L
K29.3.316.114 K29.3.316.134 K29.3.316.214 K29.3.316.234 K29.3.316.314 K29.3.316.334 K29.3.14.114 K29.3.14.134 K29.3.14.214 K29.3.14.234 K29.3.14.314 K29.3.14.334
3/16 3/16 3/16 3/16 3/16 3/16
1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4
5/32 5/32 5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16
1/4 1/4 1/4 1/4 1/4 1/4
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4
5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16
• Torque Reduction Channel that traps dust where it can’t obstruct the thread action, reducing the likelihood of binding in the hole (patent pending) • Serrated screw point for easier starts when fastening wood • Availability with either a hex head or, for a smoother installed profile, a 6-lobe-drive countersunk head • Matched-tolerance bit not required; use a standard ANSI drillbit for installation • Designed for installation with an impact driver or cordless drill • Code listed in accordance with ICC-ES AC193 for concreteapplications without cleaning dust from predrilled holes (IAPMO UES ER-712) • Use in dry interior environments only
K29.3.14.4 K29.3.14.5 K29.3.14.6
4 5 6
FLAT TORX
ANSI Drill Size
Torx Bit Size
Part No.
D
L
K29.4.316.114 K29.4.316.134 K29.4.316.214 K29.4.316.234 K29.4.316.314 K29.4.316.334 K29.4.14.114 K29.4.14.134 K29.4.14.214 K29.4.14.234 K29.4.14.314 K29.4.14.334
3/16 3/16 3/16 3/16 3/16 3/16
1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4
5/32 5/32 5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 3/16
T25 T25 T25 T25 T25 T25 T30 T30 T30 T30 T30 T30 T30
TITEN TURBO INSTALLATION KIT K29.1800
1/4 1/4 1/4 1/4 1/4 1/4 1/4
K29.4.14.4
4
Copyright © 2025
1-11-12
Made with FlippingBook - professional solution for displaying marketing and sales documents online