FASTENERS 11 Rivets & Anchors
ANCHORS — TITEN HD ® SCREW ANCHOR The Titen HD® anchor is a patented, high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete. The high strength, easy to install Titen HD® anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self- undercutting, non-expansion characteristics of the Titen HD® anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. Material: Carbon steel, heat treated. Finish: Zinc plated or mechanically galvanized. Installation Features: • No special drill bit needed: Designed to install using standard sized ANSI tolerance drill bits • Installs with 50% less torque: Testing shows that when compared to competitors, the Titen HD® requires 50% less torque to be installed in concrete. • Hex-washer head: Requires no separate washer and provides a clean installed appearance. *Some jurisdictions require an additional square plate washer for sill plate applications. Removable: Ideal for temporary anchoring (e.g. formwork, bracing) or applications where fixtures may need to be moved. Re-use of the anchor to achieve listed load values is not recommended.
1
Size
Drill Bit Diameter Wrench Size
Part No.
Size
Drill Bit Diameter Wrench Size
Part No.
K08.01.14.234 K08.01.14.3 K08.01.38.134 K08.01.38.212 K08.01.38.3 K08.01.38.4.0 K08.01.38.5 K08.01.38.6
K08.01.12.5 K08.01.12.6 K08.01.58.4 K08.01.58.5 K08.01.58.6 K08.01.58.8 K08.01.34.4 K08.01.34.5 K08.01.34.6 K08.01.34.812
1/ 4 x 2-3/4
1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2
3/8 3/8
1/2x5 1/2x6 5/8x4 5/8x5 5/8x6 5/8x8 3/4x4 3/4x5 3/4x6
1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4
3/4 3/4
1/4x3*
3/8x1-3/4* 3/8x2-1/2*
9/16 9/16 9/16 9/16 9/16 9/16
15/16 15/16 15/16 15/16 1-1/8 1-1/8 1-1/8 1-1/8
3/8x3 3/8x4 3/8x5 3/8x6 1/2x3 1/2x4
K08.01.12.3 K08.01.12.4
3/4 3/4
3/4x8-1/2
*Mini Titen HD
ANCHORS — CONCRETE SCREWS WALL-DOG™
Box Qty.
Head Style
Part No.
Finish
Size
K03.03.1 K03.03.2 K03.03.3 K03.03.4
3/16 x 1-1/4 3/16 x 1-1/4 3/16 x 1-1/4 3/16 x 1-1/4
Phillips Pan Head Phillips Oval Head Phillips Pan Head Phillips Oval Head
Chrome Chrome
100 100 100 100
White White
APPLICATIONS: Electrical fixtures, Thermostats, HVAC fixtures, Plumbing fixtures, Bathroom accessories, Shelving and supports, Brackets, Closet Organizers, Curtain rods, signs, Bulletin Boards, Control Systems, Office Material Holders, Smoke Detectors, Doorbells, Telecommunications Equipment, Remote Control boxes INSTALLATION: Wallboard or Wood: no pre-drilling required, anchor is inserted through the fixture and screwed in with an ordinary Phillips screwdriver. Masonry: requires 3/16” pre-drilled hole with a carbide drill bit.
• Installs easily in wallboard (1/2”, 5/8” & double wallboard), plywood, concrete, hollow or grout filled block, brick and plaster • One step installation, installs directly through fixture into wallboard • Smooth entry, powerful hold • Thread design prevents spinning and stripping
• Heat treated point penetrates metal and wood studs • Leaves smaller hole than toggles or other systems • Anchor made of case hardened steel • Two head styles: Oval and Pan • Two color finishes: Chrome and White • Use 3/16” concrete drill for masonry installation
ANCHORS — DROP-IN
Drop-In Anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Use in: Concrete, stone Use with: Threaded rod, bolts, machine screws Material: Zinc plated carbon steel, 303 Stainless Steel, 316 Stainless Steel
Anchors
Anchors
Anchor Size
Hole Size
Thread Depth
Anchor Length
Steel Part No.
303 Stainless Part No.
316 Stainless Part No.
IMPORTANT NOTE: Due to the exacting nature of drop-in expansion anchors requirements, the appropriate size setting tool must be used for each size and type. Failure to use the correct tool could result in fastening failure.
K24.08.14 K24.08.38 K24.08.12
K24.0008.14 K24.008.14 K24.0008.38 K24.008.38 K24.0008.12 K24.008.12 K24.0008.58 K24.008.58 K24.0008.34 K24.008.34
1/4 3/8 1/2 5/8 3/4
3/8 1/2 5/8 7/8
3/8 5/8 3/4
1
1-1/2
2
1
2-1/2
1
1-1/4 3-1/8
Setting Tool Part No.
Size
Setting Tools *sold separately
K24.9.14 K24.9.38 K24.9.12 K24.9.58 K24.9.34
1/4 3/8 1/2 5/8 3/4
Setting Tool
Copyright © 2025
1-11-14
Made with FlippingBook - professional solution for displaying marketing and sales documents online