FASTENERS 12 Chain & Cable Hardware
EYE BOLTS — FORGED WITH NUTS PLAIN PATTERN
Working Load Limit In Pounds
Thread Length (C)
I.D. Eye (D)
O.D. Eye (E)
Import Part No.
DIA (A) x SHANK (B)
C
1
G69.7.0142 G69.7.0144 G69.7.0145
A
1/4 x 2 1/4 x 4 1/4 x 5
650 650 650
1.50 2.50 2.62 1.50 2.50
.50 .50 .50 .63 .63 .63 .75 .75 .75 .75 .75
1.00 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.50 2.50 2.75 3.00 3.50 4.00 4.00
D E
B
G69.7.0516214 G69.7.0516414 G69.7.05166 G69.7.038212
5/16 x 2-1/4 5/16 x 4-1/4
1200 1200 1200 1200 1500 1500 1500 1500 2600 2600 2600 2600 2600 2600 2600 5200 5200 7200 7200
• Forged • 1030 Carbon Steel • Hot Dip Galvanized • Plain Pattern • Heavy Hex Nut Included
5/16 x 6
-
3/8 x 2-1/2
1.50
G69.7.0383
3/8 x 3
-
G69.7.038412 G69.7.0386 G69.7.0388 G69.7.0122 G69.7.012314 G69.7.012412 G69.7.0126 G69.7.0128 G69.7.01210 G69.7.01212 G69.7.0584 G69.7.0586 G69.7.0346 G69.7.0348 G69.7.0788 G69.7.016 G69.7.019
3/8 x 4-1/2
2.50 2.50
3/8 x 6 3/8 x 8 1/2 x 2
-
Working Load Limit applies to straight line pull only. These ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. When applying load at an angle the Working Load Limit is drastically reduced. Never insert the point of a hook in an eyebolt. Always use a shackle. CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
1.50 1.50
1.00 1.00 1.00 1.00 1.00 1.00 1.22 1.25 1.25 1.50 1.50 1.75 2.00 2.00
1/2 x 3-1/4 1/2 x 4-1/2
-
1/2 x 6 1/2 x 8 1/2 x 10 1/2 x 12 5/8 x 4 5/8 x 6 3/4 x 6 3/4 x 8 7/8 x 8
3.00 3.00 3.00 2.25 2.00 3.00 3.00 3.00 3.00 3.00 4.00
10600 10000 10000
1 x 6 1 x 9
EYE BOLTS — FORGED WITH SHOULDER PATTERN
DIA (A) x Shank (B)
Working Load Limit In Pounds
Thread Length (C)
I.D. Eye (D)
O.D. Eye (E)
Import Part No.
C
A
D E
G69.4.14.4
1/4 x 4
650 650
2.50 1.50 1.50 2.50 3.00 1.50 1.50 2.50 4.00 2.00 3.00 4.00 2.00 3.00 4.00
0.88 .625 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.50
0.88 1.11 1.38 1.38 1.38 1.75 1.75 1.75 1.75 2.25 2.25 2.25 2.75 2.75 2.75
G69.4.516.214 G69.4.38.212 G69.4.38.412 G69.4.38.6 G69.4.12.2 G69.4.12.314 G69.4.12.412
5/16 x 2-1/4 3/8 x 2-1/2 3/8 x 4-1/2
B
1550 1550 1550 2600 2600 2600 2600 5200 5200 5200 7200 7200 7200
• Forged • 1030 Carbon Steel • Self-Colored • Shoulder Pattern • Mfg. in Accordance with ANSI B18.15
3/8 x 6 1/2 x 2
1/2 x 3-1/4 1/2 x 4-1/2
Working Load Limit applies to straight line pull only. These ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. When applying load at an angle the Working Load Limit is drastically reduced. Never insert the point of a hook in an eyebolt. Always use a shackle. CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
G69.4.12.8 G69.4.58.4 G69.4.58.6 G69.4.58.8
1/2 x 8 5/8 x 4 5/8 x 6 5/8 x 8
G69.4.34.412
3/4 x 4-1/2
G69.4.34.6 G69.4.34.8
3/4 x 6 3/4 x 8
EYE BOLTS — MACHINERY USA
DIA (A) x Thread Length (C)
Working Load Limit In Pounds
Eye I.D. (D)
Eye O.D. (E)
USA Part No.
C
G69.4.14 G69.4.516 G69.4.38 G69.4.716 G69.4.12 G69.4.58 G69.4.34 G69.4.78
1/4 x 1
500 900
.69 .81 .94
1-3/16 1-7/16 1-21/32 1-27/32
D E
A
5/16 x 1-1/8 3/8 x 1-1/4 7/16 x 1-3/8 1/2 x 1-1/2 5/8 x 1-3/4
1400 2000 2600 4000 6000 7000 9000
1.00 1.12 1.31 1.44 1.56 1.69
2-1/16
2-1/2
• Forged Carbon Steel • ASTM A489 fully threaded • Self Colored
3/4 x 2
2-13/16
7/8 x 2-1/4
3-1/4
G69.4.1
1 x 2-1/2
3-9/16
Copyright © 2025
1-12-2
Made with FlippingBook - professional solution for displaying marketing and sales documents online