FASTENERS 12 Chain & Cable Hardware
WIRE ROPE CLIPS — MALLEABLE
Inside Length of U-Bolt (B)
Min. No. of Clips for Max. Strength
USA Galvanized Part No.
Import Zinc Plated Part No. G69.10.018 G69.10.0316 G69.10.014 G69.10.0516 G69.10.038 G69.10.012 G69.10.058 G69.10.034 G69.10.078
Size for Rope Dia.
B
1
G69.10.18 G69.10.316 G69.10.14 G69.10.516 G69.10.38 G69.10.716 G69.10.12 G69.10.58 G69.10.34 G69.10.78 G69.10.1
1/8
23/32 1-5/16 1-1/32 1-5/16 1-1/2 1-7/8 1-7/8 2-3/8
2-4 2-4 2-4 2-4 2-4 3-4 3-4 3-4 4-5 4-5 4-5
3/16
1/4
5/16
3/8
• 1030 Carbon Steel • Zinc Plated or Galvanized • All Regular Hex Nuts
7/16
1/2 5/8 3/4 7/8
2-3/4 3-1/8 3-1/2
1
Malleable rope clamps are to be used for light duty, non-critical applications. The correct way to attach U-bolts is shown above: The “U” section is in contact with the ropes’ “dead end” and is clear of the thimble. The “live end”, carrying the load, is gripped by the saddle of the clamp. DO NOT USE malleable wire rope clamps for critical or lifting applications…Load may be suddenly released resulting in injury or death. Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope. Not designed for overhead lifting
WIRE ROPE CLIPS — FORGED
Min. No. of Clips for Max. Strength
USA Part No. G69.11.18 G69.11.316 G69.11.14 G69.11.516 G69.11.38 G69.11.12 G69.11.58 G69.11.34 G69.11.78 G69.11.1
Import Part No.
Size for Rope Dia.
Inside Length of U-Bolt
G69.11.018 G69.11.0316 G69.11.014 G69.11.0516 G69.11.038 G69.11.012 G69.11.058 G69.11.034 G69.11.078 G69.11.01
1/8
3/4
2 2 2 2 2 3 3 4 4 5
3/16
31/32 1-7/32 1-5/8 1-5/8 1-29/32
1/4
5/16
• 1030 Carbon Steel • Hot Dip Galvanized
3/8 1/2 5/8 3/4 7/8
2-3/8
2-13/16
3-1/8 3-1/2
1
The correct way to attach U-bolts is shown above: The “U” section is in contact with the ropes’ “dead end” and is clear of the thimble. The “live end”, carrying the load, is gripped by the saddle of the clamp. DO NOT USE malleable wire rope clamps for critical or lifting applications…Load may be suddenly released resulting in injury or death. Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope. Not designed for overhead lifting.
WIRE ROPE THIMBLES
Size
Part No.
Size
Part No. G69.23.18 G69.23.316 G69.23.14 G69.23.516
• Material: Steel, Galvanized • Standard duty • Match thimble size to cable diameter
G69.23.38 G69.23.12 G69.23.58
1/8
3/8 1/2 5/8
3/16
1/4
5/16
SWAGE FITTINGS
Uncoated Cable
Uncoated Cable
Aluminum Sleeves Part No.
Aluminum Stops Part No.
ZP Copper Sleeves Part No.
Aluminum Sleeves Part No.
Aluminum Stops Part No.
ZP Copper Sleeves Part No.
Size Inch 5/32
Size Inch
G69.24.532 G69.25.532 G69.24.316 G69.25.316 G69.24.14 G69.25.14
G69.24.116 G69.25.116 G69.241.116 G69.24.332 G69.25.332 G69.241.332
1/16 3/32
3/16
G69.24.18 G69.23.516
G69.25.18 G69.241.18
1/4
1/8
G69.23.516
Sleeve
Stop
5/16
5/16
• Material: Aluminum or ZP Copper • Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable • Stops are capable of holding one-third to one-half of the rated breaking strength of the cable
TOOLS — SWAGING / CABLE CUTTER
• Jaws are made of forged Alloy steel with heat treatment • Hand swaggers are designed for crimping copper and aluminum ovals and stops
24” SWAGING TOOL G69.24.01 1/16, 3/32, 1/8, 5/32, 3/16
30” SWAGING TOOL G69.24.02 5/32, 1/4, 5/16
Copyright © 2025
1-12-8
Made with FlippingBook - professional solution for displaying marketing and sales documents online