ELECTRICAL 2 Fuses & Flashers
FUSES — FUSE HOLDERS (continued)
Waterproof Solderless Fuse Holder H29.4604 • For use in dusty or damp locations • 32 Volt, 30 Amp Maximum • Accepts 18 thru 12 Awg Wire • Use with 1/4” diameter by 1-1/4” long round fuses
Solderless Fuse Holder H29.4600
• 32 Volt, 30 Amp Maximum • Accepts 18 thru 12 Awg Wire • Use with 1/4” diameter round fuses — 7/8”, 1” or 1-1/4” long
Installation 1. Strip insulation from wire. 2. Insert wire in holder. 3. Crimp terminal through body. 4. Repeat steps 1-3 for other half of holder. 5. Insert fuse. 6. Snap housings together.
Installation 1. Thread wire through housing. 2. Strip insulation per strip gauge. 3. Crimp fuse clip to wire. 4. Pull wire and seat fuse clip in housing. 5. Insert fuse. 6. Snap housings together.
Proper Fuse Clip Alignment
Crimp Tool
Seam
Step 1
Step 2
Fuse Clip
2
Step 3
Fuse Panel for ATC fuses
Blade-Type Part No. 4 Position H31.5604 6 Position H31.5606 10 Position H31.5610
H29.150 MINI™ fuse holder with cover 2-20 amps #16 ga. lead wire
H29.0060 ATO/ATC fuse holder with cover 3-20 amps #16 ga. lead wire
H29.0061 ATO/ATC heavy duty fuse holder with cover 3-30 amps #12 ga. lead wire
• A single, common power input makes it simple to wire for multiple circuits • Rated to 30 amps, up to 32 volts • Quick-connect terminals for easy installations
H25.0112 MAXI™ fuse holder with cover 20-60 amps #6 ga. lead wire
H29.155 MINI™ heavy duty fuse holder with cover 2-30 amps #12 ga. lead wire
H29.160 ATO/ATC fuse holder with LED indicator 3-20 amps #16 ga. lead wire
H29.163 MINI/ATM fuse holder with LED indicator 3-20 amps #16 ga. lead wire
H29.166 Glass Tube In-line Fuse Holder 32 Volt 30 Amp with 12 gauge lead wires
H29.165 Yellow Fuse Holder 32 Volt 20 Amp 2 - 4 inch 16 Gauge lead wires
H29.145 Micro fuse holder with cover 32 volt 15 AMP with 2 - 4 lead wires, #16
H29.164 ATC Fuse Holder 32 Volt 30 Amp with 2 - 4 inch 12 gauge lead wires
FUSES — TAPS & PULLERS
Minifuse Tap Adapter
Minitaper
ATO Blade Fuse Tap
F53.1483 • Slips over leg of minifuse • Tap size .187
F53.1482
F53.1481 1/4” male
• Plugs into empty fuse cavity • Tap size .187
Non-feed through stud-type junction block 3/8-16 x 7/8” thread/stud size, 250 amps max
H29.0070 Fuse puller for ATO, Mini, Glass and Ceramic fuses.
H29.0071 ATO/ATC and mini fuse puller and tester
H29.0073 Fuse puller allows for easy fuse removal and replacement of the Mcase series fuses
Bussman No.
Type
Part No.
Poles Stud thread
H31.38162
1
3/8-16 BP/JB3816-2 Stud Junction Block
Copyright © 2025
2-2-8
Made with FlippingBook - professional solution for displaying marketing and sales documents online