ELECTRICAL 8 Battery Cable
BATTERY — SOLDER SLUGS
F10.9808 Flux for Solder Slugs
SOLDER SLUGS
• Pre-measured piece of solder that has been sized to provide the correct amount of solder for each size of cable connector. • Available in seven sizes, 4 gauge to 4/0 gauge • Color coded to coincide with industry coding • A simple and cost efficient way to achieve a perfect termination with no crimper to buy.
F10.9807
Size
Color
Part No. F10.9800 F10.9801 F10.9802 F10.9803 F10.9804 F10.9805 F10.9806 F10.9807
2
EASY TO USE: Strip the Proper size cable so that the exposed cable will reach all the way to the bottom of the battery terminal (not included) and the cable insulation fits snugly against the top.
battery terminal in vise. Slide the proper size heat shrinkable tubing over the cable. Apply several drops of FLUX to the exposed cable. Insert the exposed cable into the terminal. Heat the base of thebattery terminal while applying gentle downward pressure on the cable. Allow the cable to slide into the terminal until the insulation is snug against the top of the terminal.
2
6 Gauge 4 Gauge 2 Gauge 1 Gauge
Gray Gray
1
Green
Pink
1/0 Gauge 2/0 Gauge 3/0 Gauge 4/0 Gauge
Black
Orange Purple Yellow
Place the proper size solder slug into the terminal. Secure the
4
Remove the heat. Caution: Do not apply heat near the car battery. Use only in a well ventilated area.
3
Slide the heat shrinkable tubing over the connection. Apply indirect heat to the tubing. Allow the connection to cool. You now have “The Perfect Connection.”
BATTERY — CABLE
2 ga.
1/0 ga.
3/0 ga.
4/0 ga.
6 ga.
4 ga.
1 ga.
2/0 ga.
Size
6 ga.
4 ga.
2 ga. 0.410
1 ga.
1/0 ga.
2/0 ga.
3/0 ga.
4/0 ga.
Nominal O.D.
0.300 0.360
0.460 0.550 0.605 0.695 0.706
Roll Length Part No.
Roll Length Part No.
Gauge
Color
Gauge
Color
H72.306 H72.3061 H72.3060 H72.30610 H72.304 H72.3041 H72.3040 H72.30410 H72.302 H72.3021 H72.3020 H72.30210
H72.3011 H72.3010 H72.30110 H72.310 H72.3101 H72.31010 H72.320 H72.3201 H72.3200 H72.32010
6 Ga. 6 Ga. 6 Ga. 6 Ga. 4 Ga. 4 Ga. 4 Ga. 4 Ga. 2 Ga. 2 Ga. 2 Ga. 2 Ga. 1 Ga.
Black
25’ 25’
1 Ga. 1 Ga. 1 Ga.
Red
25’
Red
Black
100’ 100’
Black
100’ 100’
Red
Red
1/0 Ga. 1/0 Ga. 1/0 Ga. 2/0 Ga. 2/0 Ga. 2/0 Ga. 2/0 Ga. 3/0 Ga. 4/0Ga.
Black
25’ 25’
Battery and Starter Cable • Bare stranded solid copper conductors • Flexible PVC insulation resists fuel, oil, acid, and salt • Flame-retardant
Black
25’ 25’
Red Red
Red
100’
Black
100’ 100’
Black
25’ 25’
Red
Red
Black
25’ 25’
Black
100’ 100’
Note: When not using exactly the same gauge as the original, always use a heavier cable, never lighter.
Red
Red
H72.330 H72.340
Black
100’ 100’
Black Black
25’ 25’
*Welding Cable also available, listed in the Shop Supplies - Welding section
Red
H72.301
Black
25’
*Welding cable also available, listed in the Shop Supplies - Welding section.
BATTERY TERMINALS — ASIAN STYLE
F10.800 Quick Dis-connect Battery Terminal Top Neg.
F10.806 Asian Style Lead Free Battery Terminal 6-4 Ga. Neg.
F10.807 Asian Style Lead Free Battery Terminal 6-4 Ga. Pos.
F10.812 Asian Style Lead Free Battery Terminal 1-2 Ga. Neg.
F10.813 Asian Style Lead Free Battery Terminal 1-2 Ga. Pos.
F10.814 Universal Asian Style Battery Terminal 5/16” stud size (Comes with 2 5/16” Lugs)
Copyright © 2025
2-8-2
Made with FlippingBook - professional solution for displaying marketing and sales documents online