CHEMICALS Sealants & Adhesives 3
ADHESIVES — SPRAY TRIM
3M GENERAL TRIM ADHESIVE — CLEAR (Not for Sale or Use in California)
3M Part No.
Container Size
Part No.
J22.08080
08088*
18.1 oz Aerosol
• Rapid-drying, high-strength, clear adhesive in an aerosol container • Designed for bonding most types of material used in automotive trim operations except unsupported vinyl • Excellent for fabrics, upholstery, foam, jute pads, carpets, rebonding vinyl top sections, etc
• Adjustable spray pattern, high initial strength and does not require shaking or agitation before using • Provides good heat & water resistance
*Note: 3M has reformulated its General Trim Adhesive and given it a new part number, # 08088. The previous formula, # 08080, has been discontinued.
3M SUPER TRIM ADHESIVE — YELLOW (Not for Sale or Use in California) Part No. 3M Part No.
3
Container Size 19 oz. Aerosol
J22.08090
08090
• 3M Super Trim Adhesive is a fast-acting, high-strength, aerosol contact adhesive designed for two-surface application. • Resistant to heat & plasticizing oils and is excellent for attaching vinyl tops, headliners, vinyl trim, insulation, foam padding & rubber parts to metal & other surfaces
• Bonds can be made within minutes of application or as long as one hour later
ADHESIVES — EPOXIES
LOCTITE FIXMASTER ® FAST CURE EPOXY MIXER CUPS
Industrial Size Cups
Net Contents
Part No.
10 fl. oz. (10 each 1 oz. epoxy mixer cups)
J89.4574451
• Bonds almost anything: Loose trim, broken grilles, loose door glass channels, broken plastic and ceramics, metal, glass, wood, stone • Useful in casting cracks and holes • Fills porosities and can be used to build up worn parts • Can be machined or sanded once fully cured
• 2-part epoxy mixer cups – large size • Pre-measured cup contains 1 oz. of epoxy • Bonds parts in 5 to 15 minutes • Chemical resistant to petroleum-based solvents, synthetic oils, weak acids, weak bases, water and high humidity
LOCTITE 3092 INSTANT ADHESIVE Part No.
Net Weight
Loctite
J89.4503
0.35 oz
3092
• 2-component technology – controlled, fast cure • Gap-fill ability – up to 2 mm • Gel product – non-drip formula that stays where you put it • Syringe package – provides for a controlled mix ratio
• Excellent bonding characteristics on a variety of substrates – PVC, ABS, PC, PBT, wood, paper, leather • Does NOT bond PE, PP, and PTFE
PERMATEX ® PERMAPOXY TWO-PART EPOXY SYRINGES
Temperature Range -60°F to 180°F -60°F to 180°F -60°F to 300°F -60°F to 300°F -60°F to 250°F
Permatex Part No.
Package Type
Color Set Time Strength
Part No.
Description
J89.50050 J89.50054 J89.50055 J89.50056 J89.50059
General Purpose
Syringe Syringe Syringe
Clear Clear
5 Min
3400 PSI
84101 84107 84109 84209 84115
Extra Strength, Crystal Clear
30 Min 3500 PSI
Multi-Metal Multi-Metal Plastic Weld
Grey 4 Min Grey 4 Min Tan 5 Min
4500 PSI 4500 PSI 3500 PSI
Tubes
Syringe
• Extra Strength, Crystal Clear: Used to bond or repair ceramic, concrete, fabric, glass, metal, rubber • Multi-Metal: Used to bond or repair aluminum, brass, chrome, copper, iron, stainless steel and steel • Plastic Weld: Used to bond or repair ABS, acrylic, fiberglass, glass, PVC, steel, styrene, vinyl and wood
• Easy-to-use, multi-purpose, two-part adhesives in .84 fl. oz. dual syringes or two, .6 oz. squeeze tubes • Used to bond or repair almost any material • Resistant to fuels, solvents and most other liquids • After fully curing, epoxy can be drilled, sanded, threaded or filed • Usable strength at 4 hours (72°F), fully cured at 24 hours • General Purpose: Used to bond or repair ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber
Copyright © 2025
3-3-3
Made with FlippingBook - professional solution for displaying marketing and sales documents online