CHEMICALS Sealants & Adhesives 3
ADHESIVES — ANCHORS
ULTRABOND ANCHORING EPOXY
Part No. K07.02201 K07.02091 K07.02202 K07.02210 K07.06004
Description
Size
A22 Ultrabond 1 Epoxy A9 Ultrabond 1 Epoxy A22 Ultrabond 2 Epoxy
21.2 oz. cartridge 9 oz. cartridge 21.2 oz. cartridge
K07.02210
Ultrabond Dispenser Gun TM22HD
Use with A22 Epoxy 21.2 oz.
Ultrabond NozzleT3412CT Dual 3/4” and 1/2” Nozzles • Ultrabond 1™ is a “fast-cure” formula specifically developed for projects requiring “fast bolt-up” and extended working time in a variety of applications.* • Ultrabond 2™ is a “slow-cure” formula designed specifically for job conditions requiring maximum working times up to 17-20 minutes.* • Ultrabond Dispenser Gun TM22HD is designed to be used with A22 Ultrabond 21.2 oz. cartridges. • Ultrabond Mixing Nozzles break off to accommodate varying hole diameters and depths.
• Available in two epoxy formulas • Use for anchoring and doweling in concrete, brick, stone • Superior Bond Strength • Works well in wet or underwater conditions • Bonds a variety of substrates
• Corrosion resistant • Minimal shrinkage • See product application guide
3
ULTRA BOND™ APPLICATION GUIDE
Ultrabond 1
Ultrabond 2
Ultrabond 1
Ultrabond 2
APPLICATIONS
Base Materials
Horizontal anchoring and doweling Overhead anchoring and doweling Vertical anchoring and doweling Hollow block anchoring and doweling
• • • • • •
• • • •
Concrete
• • • • • • •
• • • • • • • •
Lightweight and aerated concrete Grout-filled concrete block Hollow concrete block (CMU)
Seismic repair and upgrade Concrete repair - non structural
Solid Brick
Hollow Brick
Stone
Bonding applications (variety of materials)
O
• * Gel and Minimum load time based on substrate temperature of 78°F. Gel and cure times increase as substrate and cartridge temperature decreases. • - Ideal choice O - Possible choice depending on application and job conditions
Ultrabond 1
Ultrabond 2 17-20 min. 10 hours 35°F - 115°F
GEL AND CURE TIMES*
Gel time
8-10 min.
Minimum load time
4 hours
Temperature range for applying product
35°F - 115°F
ULTRABOND 1300 Part No.
Description
Size
K07.02130
A22 Anchor Epoxy
21.2 oz. Cartridge
• Working Time: 20 minutes • Load Time: 2 hours • Tension Load (1/2”): 14,146 lbs. • Color (mixed): Gray
• Two component gel 1:1 epoxy gel • 100% solids high modulus structural gel • Solvent-free • No Odor • High Strength, moisture insensitive, & non-sag
• Applications: fastening in grout filled block and unreinforced masonry, seismic anchoring and bracing, grouting dowel bars and tie bars for full-depth concrete pavement repairs, bonding raised pavement markers to concrete or asphalt, pick proof sealant – windows, doors, locks, etc. (e.g. correctional facilities), and capping paste for crack-injection
• High heat deflection up to 131°F • Temperature range: 40-110°F • Engineers choice for setting adhesive anchors in elevated temperature environments
SET ANCHORING ADHESIVE Part No. Description
Size
K07.02321
SET22
22 oz. Cartridge 9 oz. Cartridge Mixing Nozzle
F3106
SET PAC EZ
K07.02301 K07.02300
EMN22I EDT22S
22 oz. Dispensing gun
• Two-component, 1:1 ratio, high-solids, epoxy-based adhesive • High strength, non-shrink anchor grouting material • Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle
• Meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C. • Applications: Threaded-rod anchoring, Rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures, and paste over for crack injection
Copyright © 2025
3-3-9
Made with FlippingBook - professional solution for displaying marketing and sales documents online