CHEMICALS Sealants & Adhesives 3
ADHESIVES — ANCHORS (continued)
SET ANCHORING ADHESIVE Part No. Description
Size
K07.02321
SET22
22 oz. Cartridge 9 oz. Cartridge Mixing Nozzle
F3106
SET PAC EZ
K07.02301 K07.02300
EMN22I EDT22S
22 oz. Dispensing gun
• Two-component, 1:1 ratio, high-solids, epoxy-based adhesive • High strength, non-shrink anchor grouting material • Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle
• Meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C. • Applications: Threaded-rod anchoring, Rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures, and paste over for crack injection
3
ET ANCHORING ADHESIVE Part No.
Description
Size
K07.02322
ET22/ETHP
22 oz. Cartridge
• Two-component, 1:1 ratio, high-solids, epoxy-based adhesive • High strength, non-shrink anchor grouting material • Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle
• Meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C. • Applications: Threaded-rod anchoring, Rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures, and Paste-over for crack injection
AT FAST-CURING ANCHORING ADHESIVE FOR CRACKED AND UNCRACKED CONCRETE Part No. Description Size K07.02331 AT10/ATXP 9 oz. Cartridge • Passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep • Code-listed per IAPMO UES ER-263 • Can be used under static and seismic loading conditions in both cracked and uncracked concrete
• Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge • Cures in substrate temperatures as low as 14°F in 24 hours or less • Easiest hole-cleaning method – no power brushing needed • When properly mixed, adhesive will be a teal color for easy identification
ADHESIVES — THREADLOCKERS & RETAINERS
DYNATEX THREADLOCKERS Part No. Color
Net Contents
Grade
J89.2910 J89.2911
Red Boltlocker Blue Boltlocker
.20 fl. oz. (6 ml) .20 fl. oz. (6 ml)
High Strength
Medium Strength
Technical Data Red: Fills gaps up to .008 inches; for application before assembly; very strong, difficult-to-break bond; high heat of at least 400 ° F usually required to break bond Blue: Fills gaps up to .006 inches; for application before assembly; bond can be broken with normal hand tools Green (Boltlocker): Fills gaps up to .005 inches; wicking formulation migrates into preassembled threaded parts after adjustments are complete; for application after assembly; bond can be broken with normal hand tools Green (Sleevelocker): Fills gaps up to .006 inches; for application before assembly; retains sleeves; eliminates press and slip fits; replaces splines and keys; returns worn out-of-tolerance assemblies to fit; bond can be broken with normal hand tools
• Anaerobic threadlocking compounds • Locks and seals metal assemblies in the absence of air
• Various strengths for different applications • Provides gap filling and fixturing in minutes • Seals against loosening and leakage due to vibration • Resistant To: oil, transmission fluid, glycol/water solutions and mild acids • Temperature Range: -65°F to 350°F • Applications: nuts, bolts, studs, press fits, slip fits, screws, bushings, sleeves, shafts, bearings, other fasteners and metal assemblies • Note: Not recommended on plastics.
Copyright © 2026
3-3-9
Made with FlippingBook - professional solution for displaying marketing and sales documents online