CHEMICALS Sealants & Adhesives 3
SEALANTS — PIPE THREAD SEALANTS (continued)
PIPE JOINT COMPOUND WITH PTFE OATEY GREAT WHITE
Net Contents
Permatex Part No.
Part No. J89.4576 J89.4577
8 fl. oz. (237 ml) 16 fl. oz. (473 ml)
31231 31232
• White Teflon, paste-type thread sealing compound (brush-top can) • Seals threaded connections against leakage due to internal pressure • NEVER hardens, cracks or becomes brittle • Non-drip, smooth, grit-free, non-separating & flexible • Withstands High Pressures: 3000 psi on gases from -50° to +400°F • 10,000 PSI on gases from -50° to +500°F • Potable Water Safe – Non-toxic (no lead), no odor & non-staining
• NSF, UPC and IAPMO Listed • Applications: Lubricates and seals ALL plastic & metal threaded connections including PVC, CPVC, ABS, polyethylene, polypropylene, nylon, delrin, cycolac, iron, steel, copper & brass • For Use On: water, steam, natural & LP gas, oil, caustics or dilute acid lines
3
SEALANTS — FOAM SEALANTS
HANDI-FOAM ® POLYURETHANE FOAM SEALANT Part No. Net Contents
Package
J91.73120 J91.73121
12oz 24oz
Straw Top Gun Sealant
• Will not harm electrical wire insulations, Romex ® , rubber, PVC, polyethylene or other plastic • Approved for use around wires, plumbing penetrations, etc. • Protects against UV rays (i.e. sunlight) by painting or staining to prevent long term discoloration or degradation • Applications: fill and seal around gaps, beneath base plates, mud sills, corner joints, t-joints, exterior cracks, around utility panels, pipes, penetrations, filling cracks, crevices, and to fill smaller cavities on flat or irregular surfaces
• Multiple purpose, one-component polyurethane foam • Dries tack-free in approximately 5 minutes • Fully cures within 24 hours depending on moisture and temperature conditions • Adheres to almost all building materials • Cured foam is resistant to temperatures ranging between -200°F to +240°F (-129°C to + 115°C) • Water resistant • Use gun sealant with application gun J91.73122
FIREBLOCK POLYURETHANE FOAM SEALANT
Net Contents
Package
Part No.
J91.73125
24oz
Gun Sealant
• Will not harm electrical wire insulations, Romex ® , rubber, PVC, polyethylene or other plastic
• Multiple purpose, one-component fire resistant polyurethane foam • Assists in preventing air and moisture infiltration • Fills gaps between combustible finish materials and walls • Dries tack-free in approximately 5 minutes • Fully cures within 24 hours depending on moisture and temperature conditions • Adheres to almost all building materials • Cured foam is resistant to temperatures ranging between -200°F to +240°F (-129°C to + 115°C) • Use gun sealant with application gun J91.73122
• Approved for use around wires, plumbing penetrations, etc. • Color: Orange (for easy identification by code officials)
• Applications: fill and seal around gaps, beneath base plates, mud sills, corner joints, t-joints, exterior cracks, around utility panels, pipes, penetrations, filling cracks, crevices, and to fill smaller cavities on flat or irregular surfaces • This product is only rated for residential use, not to be used in commercial applications
HANDI-FOAM AND FIREBLOCK ACCESSORIES Part No. Description J91.73122 Application Gun (Trigger) J91.73123 Cleaner for Application Gun (12oz)
• Durable application gun, solvent resistant • Cleaner dissolves uncured or fresh polyurethane foams • Cleans application gun and overspray areas
Copyright © 2025
3-3-17
Made with FlippingBook - professional solution for displaying marketing and sales documents online