SHOP SUPPLIES Hand Tools 2
TOOLS — HAND TOOL WARRANTY INFORMATION
CHROME HAND SOCKETS: • Do not use hand sockets with impact or power driven tools. Serious injury is possible. • Use safety goggles. Eye injury is possible. • Do not hammer on sockets or drive tools. • Do not use extenders or cheater bars on drive tools. BLACK IMPACT SOCKETS: • Do not hold sockets, universal joint or other attachment when power tool is running. • Do not use damaged sockets. Replace them before using. • Do not continue to hammer with an impact tool once the fastener is tight. • Use safety goggles. Eye injury is possible. WRENCHES: • Do not use extenders or cheater bars. Injury is possible. • Use safety goggles. Eye injury is possible. • Instructions in using wrenches: 1. Use correct size wrench 2. Do not use fractional wrenches on metric fasteners or vice versa. 3. Use the type of wrench that is best fit for the job.
• Prevent slipping. Keep tools clean. • Fit screwdriver tip width and thickness to fastener slot size. PLIERS: • Use safety goggles. Eye injury is possible. • Do not use pliers with cushion grips on electrical circuits. There is no insulation. • Do not use extenders or cheater bars on pliers handles. ADJUSTABLE WRENCHES: • Use safety goggles. Eye injury is possible. • Adjust wrench tightly on fastener. • Use correct size wrench. • Pull the wrench. Do not push. TORQUE WRENCHES: • Use safety goggles. Eye injury is possible. • Do not use cheater bars, hammers or other damaging objects on torque wrenches. • Do not exceed rated torque capacity of wrench. • Do not exceed capacity of fastener. • Do not use torque wrenches to break fasteners loose. • Pull the wrench towards you. Do not push.
4. Use the box end of the wrench if possible. 5. Pull the wrench towards you. Do not push. 6. Use a lubricant on a corroded fastener.
• Do not drop torque wrenches. May loose calibration. • Torque wrenches should be re-calibrated every year.
SCREWDRIVERS: • Use safety goggles. Eye injury is possible.
• Do not pry, punch, chisel, scrape, hammer or otherwise misuse. • Do not use screwdrivers on electrical circuits. There is no insulation.
4
Hand tools that are in our product line carry the manufacturer’s warranty and fall under that manufacturers guidelines and procedures. We reserve the right to deny any warranty claim until evaluated by the manufacturer(s). We may choose to replace the item or issue credit for the warranty item up front before manufacturer evaluation. In those cases, Winzer will charge the salesperson for the replacement, if the item is determined by the manufacturer to not be considered as warranty. Such cases could be abused or misused tools. We do not condone or support the abuse and misuse of hand tools and accept no responsibility on the abuse or misuse of these tools. For this reason, tools that have been abused or misused, will not be accepted under warranty. Abuse and misuse of tools causes accidents and bodily injury. Tools are designed to perform specific functions. Misuse and abuse may put stress and fatigue on a tool, which are beyond the design of the tool and when this happens the tool will break. Examples of misuse and abuse are : • Broken screwdriver tips and bent shanks are the result of using the screwdriver as a pry bar, punch or chisel. • A chrome socket with square drives that have rounded out corners and/or peened metal around the drive end show the normal signs of use on an impact or power wrench. Continued use on an impact wrench will cause the socket wall to crack or shatter. • Ratchet handles and wrenches that have been dented, grooved and broken indicate abuse with “cheater bars” or a hammer. • Plier handles that are bent or broken are the signs of prying or over torqueing.
TOOLS — HEX BIT KITS, INSERTS & ACCESSORIES
HEX BITS & KITS Sizes Description
• Screwdriver Insert Bit Kit includes all the inserts listed above, packaged in a handy plastic case • Choice of storage handle or cushion handle, both with magnetic insert holder • Comes with 1/4” hex shank holder for electric screwdrivers
Part No. G92.5.3 G92.5.4 G92.6.0 G92.6.1 G92.6.2 G92.6.3 G92.7.1 G92.7.2 G92.8.1 G92.8.4 G92.8.6 G92.8.8 G92.8.10 G92.14.0 G92.14.1 G92.14.2 G92.14.3
Mag. bit holder Socket adapter Phillips insert Phillips insert Phillips insert Phillips insert Pozidrive insert Pozidrive insert Slotted insert Slotted insert Slotted insert
#0 #1 #2 #3 #1 #2
• Kit with storage handle driver # G92.5.1 • Kit with cushion handle driver # G92.5.2 • 1/4” shank insert bits *Not included in kit
1-2 4-5 6-8
8-10 Slotted insert 10-12 Slotted insert
#0*
Square insert (Robertson) Square insert (Robertson) Square insert (Robertson) Square insert (Robertson)
#1 #2 #3
WIHA ® BIT SELECTOR SET
• Compact, plastic storage box • Slide out drawer allows quick bit access and secure storage • 1/4” bits are made of hardened chrome- vanadium-mobdenum tool steel
Set Contents (1 of each)
Part No.
Phillips Sizes: 0, 1, 2, 3 Slotted Sizes: .177, .216, .315 Torx Sizes: #10, #15, #20 1/4” Magnetic bit holder
G92.2.75
Copyright © 2025
4-2-5
Made with FlippingBook - professional solution for displaying marketing and sales documents online