CUTTING TOOLS Saw Blades & Cutters 3
CUTTING — BLAIRCUTTERS
G60.6055 BLAIRCUTTER KIT (Blair No. 13218) comes in a handy plastic case and contains 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, and 5/8” diameter cutters as well as a (Blair No. 13216) Arbor with Retractable Pilot and three extra Pilots.
BLAIRCUTTERS – SOLD SEPARATELY Economy and quality. Fast,accurate, burr-free holes for materials up to 3/16” thick in seven sizes for 1/4” and larger drill chucks. Spring loaded pilot “pops” the slug from the cutter.
Blair Part No.
Part No.
Diameter
ARBOR AND PILOT FOR BLAIRCUTTERS & SPOTWELD CUTTERS
G60.6005
1/4”
13200*
FOR SHEET METAL (FOR THINNER MATERIALS) • Precision ground high speed steel Blaircutters, 1/4” thru 5/8” diameter • Precision slug-ejector type alloy steel arbor fits 1/4”, 3/8”, and 1/2” chucks • Screw adjustment of Ejector Pilot tension spring • Long wearing replacement pilots • Rugged teeth provide longer tool life • Cuts holes faster and cleaner than twist drill • Requires much lighter equipment with only a fraction of the power and effort needed for twist drilling and cuts without distorting inner panel • Much lower cost-per-hole than for twist drills and less fixturing
Blair Part No.
Part No.
Description
1/4” Arbor with retractable pilot for Blaircutters and Spotweld Cutters
G60.6045
13216
G60.6050
Retractable Pilot
13217*
6
* Noted Blair Number refers to a 3 piece package while part number refer to a 1 piece package.
CUTTING — SPOTWELD CUTTERS
BLAIR DOUBLE-END SPOTWELD CUTTER ASSEMBLY
G60.6060
Blair Part No.
Part No.
Description
G60.6060
Spotweld Cutter Assembly
13219
Adjustable stop rod (Retractable Pilot) lets you set depth of cut precisely, so only the outer panel is cut thru.
G60.6040
Double-End Cutter
13214*
G60.6050
Retractable Pilot
13217*
G60.6045
Arbor w/ Pilot
13216
• The Spotweld Cutter Assembly contains one Arbor, one retractable Pilot, and one 3/8” double-End Cutter • Twice the tool life • Unique 3/8” diameter hardened and precision ground cutting tool • Makes removing spot welded body panels fast and easy • Hollow design cuts around weld, thus hardness does not affect tool • sharpness • Adjustable depth rod sets the tool so only the outer panel is cut through • Leaves the underlying panel undamaged • When Double-End Cutters become dull, simply unscrew the cutter from the arbor, and reassemble with the new teeth exposed • Arbor can be used in any 1/4”, 3/8”, or 1/2” chucks
G60.6050
G60.6040
G60.6045
* Noted Blair Nos. refer to a 3 pc. package while FastServ Part Nos. refer to a 1 pc. package.
Copyright © 2025
6-3-9
Made with FlippingBook - professional solution for displaying marketing and sales documents online