CUTTING TOOLS 5 Misc Cutting Tools
REAMERS — SPIRAL FLUTE (continued)
HIGH SPIRAL FLUTE CAR REAMER — HEAVY-DUTY
Diameter
Flute Length
Overall Length
Part No. G61.18.38 G61.18.12 G61.18.916 G61.18.58 G61.18.34 G61.18.78 G61.18.1
3/8 1/2
2-3/4
4-5/8 5-7/8 5-7/8 6-3/8 6-7/8 6-7/8 6-7/8
• Designed for heavy duty reaming of structural steel assemblies • Tapered at the point for holes out at alignment • 1/2” Shank with 3 flats
4 4
9/16
5/8 3/4 7/8
4-1/2
5 5 5
1
END MILLS — DOUBLE-END, 4-FLUTE, CENTER CUT END MILLS
DOUBLE END 4 FLUTE MILLS
Mill Diameter
Flute Length Shank Diameter
Part No.
G55.04.18 G55.04.316 G55.04.14 G55.04.516 G55.04.38 G55.04.12 G55.04.58 G55.04.34
1/8
3/8 1/2 5/8 3/4 3/4
3/8 3/8 3/8 3/8 3/8 1/2 5/8 3/4
3/16
Double-End “Center Cut” End Mills are designed for economical profiling and milling of slots, pockets and where plunge cutting is desired. Multi-flute design produces a finer surface finish on work that has previously been roughed out.
1/4
5/16
3/8 1/2 5/8 3/4
1
1-3/8 1-5/8 1-7/8
• Made from high speed steel • Made in USA
G55.04.1
1
1
6
END MILLS — DOUBLE-END, 2-FLUTE, CENTER CUT END MILLS
DOUBLE END 2 FLUTE MILLS
Mill Diameter
Flute Length Shank Diameter
Part No.
G55.02.18 G55.02.532 G55.02.316 G55.02.14 G55.02.932 G55.02.516 G55.02.1132 G55.02.38 G55.02.1332 G55.02.716 G55.02.1532 G55.02.12 G55.02.916 G55.02.58 G55.02.1116
1/8
3/8
3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8
5/32 3/16
7/16 7/16
1/4
1/2
Double-End Two-Flute End Mills are designed for economical general- purpose milling of keyways, slots and pockets. Two-Flute End Mills are sometimes called “Slot Drills” and are recommended for roughing out slots and deep pockets because their deep flutes are less prone to loading or clogging with chips. Two-Flute End Mills can be used to plunge cut or drill into the work piece.
9/32 5/16
9/16 9/16 9/16 9/16
11/32
3/8
13/32
13/16 13/16 13/16 13/16 1-1/8 1-1/8 1-5/16 1-5/16 1-9/16
7/16
15/32
1/2
• Made from high speed steel • Made in USA
9/16
5/8
11/16
G55.02.34 G55.02.78 G55.02.1
3/4 7/8
1
1-5/8
1
END MILLS — ROUGHING END MILLS
ROUGHING MILLS
Shank Diameter
No. of Flutes
Overall Length
Mill Diameter Flute Length
Part No.
G55.05.14 G55.05.516 G55.05.12 G55.05.58 G55.05.34
1/4
5/8 3/4
3/8 3/8 1/2 5/8 3/4
3 3 4 4 4
2-7/16 2-1/2 3-1/4 3-3/4 3-7/8
5/16
1/2 5/8 3/4
1-1/4 1-5/8 1-5/8
• High Speed Steel • For extremely rapid stock removal • Made in USA
Copyright © 2025
6-5-2
Made with FlippingBook - professional solution for displaying marketing and sales documents online