FLUID POWER Weatherhead Hydraulics 6
FLUID POWER — WEATHERHEAD EQUIPMENT
ET1187
Description
Part No.
Features: • Can be mounted on service vehicles or bench tops • Can be used remotely, 65lbs • Can be powered with virtually any 10,000 psi hydraulic power source (minimum of 36 cu. Inch pump reservoir capacity is required) • Utilizes existing FT1380 dies Benefits: • Color-coded collar for core hose products • makes setup fast and easy • Easily Transported between job sites • Versatile power source options • Lower investment cost than other variable crimpers • Comes with high efficiency PFTE grease Capabilities: -4 (1/4) thru -20 (1-1/4) Braided Hose -6(3/8) thru -16 (1) Spiral Hose
Bench Mount Machine/Tooling/Pump 110v Pkg Truck Mount Machine-Tooling-Air/ Hyd Pump Pkg Bench Mount Machine (no pump)
J97.1187.8
ET1187-008
J97.1187.9
ET1187-010
J97.1187.1 J97.1187.17 J97.1187.2 J97.1187.19 J97.1187.001 J97.1187.002 J97.1187.003 J97.1187.004
ET1187 ET1187 ET1187 ET1187
Bench Mount bracket
Truck Mount Machine (no pump)
Truck Mount Bracket 2-Stage hand pump Air/Hydraulic Pump 110 Volt Electric Pump
ET1000PK-001 ET1000PK-002 ET1000PK-003 ET1000PK-004
12 Bolt DC Electric Pump Die Pkg for -4 thru -16 Braided and -6 thru -12 Spiral hose
J97.1187.3
ET4020TP-0002
J97.1187.4
FT1380-200-M420 Die for -16 Spiral hose FT1382-200-M465 Die for -20 Braided hose
J97.1187.420
The ET1187 machine is our most economical variable crimp machine to date. It boasts a broad crimp capability with a new “ease of use” that is sure to excite hose assemblers in the field. It’s as simple as turning the collar to the correct color to match the layline on the hose, adjust the ring so that the correct size dot align with the correct size line on the collar and the machine is set for the correct crimp.
Features: • Portable, positive stop, economical • Can be mounted on service vehicles • Utilizes 2-piece collet assemblies • Spacer rings control the crimp diameter Benefits:
ET1000
Description
Part No. J97.1001 J97.1003
• Sliding pusher allows for easier fitting insertion into the machine • Simple positive-stop crimp diameter control system for consistent crimping time after time with no operator adjustments required • Easily transported between job sites • Versatile power source • Electricity is required only when using an electric pump Capabilities: -4 (1/4) thru -16 (1)Braided Hose -6 (3/8)thru -16 (1)1Spiral Hose Features: • Positive stop, economical • Can be mounted on a bench or the C-40X cabinet • Utilizes 2-piece collet assemblies • Spacer rings control the crimp diameter Benefits: • Simple positive-stop crimp diameter control system for consistent crimping time after time with no operator adjustments required • Versatile power source options • Comes with high efficiency PFTE grease Capabilities: -4 (1/4) thru -20 (1-1/4) Braided Hose -6 (3/8) thru -20 (1-1/4) Spiral Hose
ET1000 - Basic Machine only, (No Pump) ET1000 - Machine with air/hydraulic pump* ET1000 - Adapter Ring req’d to use ‘U’ & ‘Z’ collets
J97.1000.01
The portable ET1000 crimp machine boasts a broad crimp capability with an ease-of-use that is sure to please hose assemblers. With four pump options—air/hydraulic, hand, 110V, or 12V DC—this portable machine comes equipped with a stand pre-drilled for mounting to a workbench or table-top.
T-420
Description
Part No.
J97.4201
T-420 w/110V Pump Kit and T420TP-1001 Tool Pkg
7
The T-420 is a versatile machine ideal for your shop, factory, construction and mine locations. Large capacity combined with lever-activated crimping gives you wide coverage and a quick and simple way to make factory-quality hose assemblies.
Features: • User-friendly operation to minimize training and mistakes • Pre-set crimp settings and simple die cage insertion reduce setup time • Electronic controls for minimal maintenance
FT1380
Description
Part No. J97.4020
• Upright design for easy hose insertion • Compact design that requires little space Benefits:
FT1380 Crimper Pkg 430'U' & 'Z' series
The FT1380 crimp machine crimps all your hose needs up to and including -20 spiral wire hose. The FT1380 is electronically controlled to give fast, accurate crimps the first time and every time you need a hose assembly. The electronic keypad is easy to adjust, with up to 10 programmable crimp settings. For hose styles and sizes used less frequently, simply enter the 3 digit code of that hose.
• Easy and quick to electronically enter crimp settings • Can pre-program 10 most popular crimp settings • Die cages easily slip in and out of machine • Machine capable of swaging thermoplastic hose and hose fittings • Comes with high efficiency PFTE grease Capabilities: -4 (1/4) thru -20 (1-1/4) Braided Hose -6 (3/8) thru -20 (1-1/4) Spiral Hose
Features: • Shop/work table mount, positive stop
ET4001
• Features a two-stage pump providing high flow at low pressure for fast ram approach and low flow at high pressure for actual crimping Benefits: • Ideal for factory, construction and mine locations • Crimps up to 2” 6 wire spiral hose • Comes with high efficiency PFTE grease Capabilities: -4 (1/4) thru -32 (2) Braided hose -6 (3/8) thru -32 (2) Spiral hose
Description
Part No.
J97.4006
ET4001 w/220V Pump and ET4001TP-1002
The ET4001 is ideal for factory, high performance machine operations, construction and mine locations. This machine offers the capabilities of crimping all the crimp-style hose ends through -32. With this coverage, this heavy-duty crimper can handle all of your crimping needs.
Copyright © 2025
7-6-23
Made with FlippingBook - professional solution for displaying marketing and sales documents online