FLUID POWER Gates Hydraulics 7
HOSES — GATES
C5C HYDRAULIC HOSE — SAE 100R5
Reel Qty./Ft. ±10%
Work Press. (PSI)
Min Burst Press. (PSI)
Min. Bend Radius
Gates Part No.
Part No. Per Ft.
Hose I.D.
Hose O.D.
J99.005.4.1 J99.005.6.1 J99.005.8.1 J99.005.10.1
3/16 5/16
.52 .67
3,000 2,250 2,000 1,750
12,000 9,000 8,000
3.0 4.0 4.6 5.5
4C5C 6C5C 8C5C
50
385 330 275
13/32 .77
1/2
.92
7,000
10C5C
• Recommended For: Medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filitration lines. Meets or exceeds
requirements of SAE J1402 Type All for air brake applications (-4 to -12). Not recommended for gasoline or diesel fuel. • Tube: -4 and -5: black, oil and heat resistant synthetic rubber (Neoprene - Type A); -6 through -40: (Nitrile - Type C). • Reinforcement: One braid of high tensile carbon steel wire over one braid of polyester. • Cover: Black, oil and mildew resistant polyester braid.
• Temperature Range: Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. For wateremulsions, etc., see page C8. Avoid continuous use at maximum temperature concurrent with maximum working pressures. • Couplings: C5 Field Attachable Couplings, Permanent PC Couplings.
C5D HIGH TEMP MULTIFLUID HOSE
Reel Qty./Ft. ±10%
Work Press. (PSI)
Min Burst Press. (PSI)
Min. Bend Radius
Gates Part No.
Part No. Per Ft.
Hose I.D.
Hose O.D.
J99.006.6.1 J99.006.8.1
5/16
.67 .77
1,500 1,250
6,000 5,000
1.8 2.0
6C5D 8C5D
50
13/32
330
• Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type All, and SAE J1019 and fuel resistance of SAE J30R2. • Tube: Black, oil and heat resistant, synthetic rubber (CPE - Type J). • Reinforcement: One braid of high tensile steel wire over one braid of polyester. • Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber. • Temperature Range: -40°F to +300°F (-40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C). • Couplings: C5 Field Attachable Couplings.
7
GMV — MEGAVAC ® RETURN LINE AND SUCTION HOSE - SAE 100R4 (Meets Flame Resistance Acceptance Designation “U.S. MSHA 2G”)
Reel Qty./Ft. ±10%
Work Press. (PSI)
Min Burst Press. (PSI)
Min. Bend Radius
Gates Part No.
Part No. Per Ft.
Hose I.D.
Hose O.D.
J99.010.016.1 J99.010.020.1
1
1.45 1.76
300 250
1200 1000
3.0 4.0
16GMV 20GMV
100 100
1-1/4
• Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE100R4. • Tube: Black, synthetic rubber is specifically designed for resistance to high temperatures (Nitrile - Type C). • Reinforcement: Double spiral textile (braid for -12, 16, -20) reinforcment with a helical spiral-wire to prevent collapse. • Cover: Black synthetic rubber cover, oil and abrasion resistant (Neoprene - Type A). • Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time). • Couplings: MegaCrimp ® Couplings (-12 through 20), GL Couplings (-24 and-32).
LOL LOCK-ON HOSE
Reel Qty./Ft. ±10%
Work Press. (PSI)
Min Burst Press. (PSI)
Min. Bend Radius
Gates Part No.
Part No. Per Ft.
Hose I.D.
Hose O.D.
J99.009.4.1 J99.009.6.1 J99.009.8.1 J99.009.10.1 J99.009.12.1
1/4 3/8 1/2 5/8 3/4
.47 .63 .77 .94
300 300 300 300 300
1,200 1,200 1,200 1,200 1,200
3.0 3.0 5.0 6.0 7.0
4LOLA 6LOLA 8LOLA 10LOLA 12LOLA
475 300 300 250 225
1.06
• Recommended For: Petroleum-base hydraulic oils, water, glycol anti-freeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Do not use for gasoline or diesel fuels, unless approved by Gates H/C Product Application. • Tube: Black, oil-resistant synthetic rubber highly resistant to oil and heat (Nitrile - Type C). • Reinforcement: One fiber braid. • Cover: Oil and abrasion-resistant synthetic rubber (Modified Nitrite - Type C2). Available in black-Neoprene (LOLA) • Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: 160°F (+71°C) only. • Couplings: Field attachable LOC, clamp over beaded nipple.
Copyright © 2025
7-7-11
Made with FlippingBook - professional solution for displaying marketing and sales documents online