FLUID POWER 8 Valves & Couplers
COUPLERS — ADAPTERS CAM & GROOVE (continued)
DIXON‘ANDREWS’TYPE DC DUST CAP Size Dixon SS Part No.
SS Part No. G88.804.1
Dixon AL Part No. 100-DC-AL 150-DC-AL 200-DC-AL 300-DC-AL 400-DC-AL
AL Part No. G88.804.01
1”
G100-DC-SS
G88.804.0150 G88.804.02 G88.804.03 G88.804.04
1-1/2”
G88.804.2
2” 3” 4”
G200-DC-SS
• Dust caps and dust plugs are not to be used in pressure applications for safety and enviromental reason
SAFETY ALERT
CAM AND GROVE GASKET Size
Dixon Buna-N Part No.
AL Part No.
G88.830.1
1”
100-G-BU 125-G-BU 150-G-BU 200-G-BU 250-G-BU 300-G-BU 400-G-BU
G88.830.114 G88.830.112 G88.830.2 G88.830.212
1-1/4” 1-1/2”
2”
2-1/2”
G88.830.3 G88.830.4
3” 4”
COUPLERS — BOSS
PURPOSE: To supply a convenient threaded fitting needed to connect two lengths of hose, or a single length to a male or female threaded (NPT) outlet on any type of equipment. The Spud part of the coupling serves as one half of the connection and is usually fixed permanently to the equipment. The Stem and Nut attached (clamped) to the hose are the other half. The two halves are conected or disconnected by rotating the Wing Nut on the Spud, to achieve a mechanical, as well as, a pressure seal. SERVICES: All-Purpose Hose Couplings, universally recommended for steam hose connections. They are also widely used with equal efficiency for high or low pressure Air, Water, Liquid petroleum Gas, Fluid Petroleum Products, Chemicals, Potable Fluids and almost any other types of fluid or gas. They can be applied to all types of rubber, synthetic, plastic, metallic (with special stems) or semi-metallic hose. MATERIALS: 1/4” to 1” includes: 1-1/4” to 6” include:
Stems:
Plated Steel
Plated Malleable Iron through 4” Tubular Steel - 6”
‘EZ-BOSS’ GROUND JOINT SEAL GROUND JOINT Positive Metal-to-Polymer Seal
Spuds:
Plated Steel
Plated Malleable Iron Plated Malleable Iron
Wing Nuts: Plated Malleable Iron
• Made in USA
7
The leakproof seal in the ‘Boss’ Coupling is affected in Ground Joint Style by a soft-to-hard-polymer connection when the rounded head of the stem is in firm contact with the beveled polymer insert in the Spud. Job down time to replace lost or deteriorated washers is eliminated, and the sealing efficiency is not affected by dirt, grime or by normal wear through repeated use.
BOSS MALE STEM STEEL BAR STOCK
COMPLETE FEMALE COUPLING
MALLEABLE IRON
Hose X NPT
Dixon Part No.
Part No.
Dixon Part No.
Part No.
Size
Hose Shank X NPT
Dixon Part No.
Part No.
G88.906.1212 G88.906.3434
1/2” x 1/2”
MS1
G88.907.2
2”
MS26
3/4” x 3/4”
MS6
G88.900.1
1”
GF36
G88.906.11
1” x 1”
MS11
BOSS HOSE MENDER
Dixon Part No.
Part No.
Size
G88.908.34
3/4”
M6
G88.908.1
1”
M11
Copyright © 2025
7-8-14
Made with FlippingBook - professional solution for displaying marketing and sales documents online