AUTOMOTIVE 6 Wheel & Tire Suspension
ALIGNMENT — SHIMS
CT Illustration
Nominal Thickness
Bolt Opening
X Illustration
Part No.
Part No.
Nominal Thickness Bolt Opening
E13.12.164 E13.12.132 E13.12.116 E13.12.18
1/64” 1/32” 1/16”
17/32” 17/32” 17/32” 17/32”
E13.14.18 E13.14.316
1/8”
7/16” 7/16”
3/16”
1/8”
Application: GM Control arm shaft mounting bolts up to 7/16” (10mm) diameter.
Application: GM Control arm shaft mounting bolts up to 1/2” (12mm) diameter.
N Illustration
CC Illustration Nominal Thickness Bolt Opening
Part No.
Nominal Thickness Bolt Opening
Part No.
E13.15.132 E13.15.116 E13.15.18
E13.13.164 E13.13.132 E13.13.116 E13.13.18 E13.13.316
1/32” 1/16”
9/16” 9/16” 9/16”
1/64” 1/32” 1/16”
33/64” 33/64” 33/64” 33/64” 33/64”
1/8”
Application: GM Control arm shaft mounting bolts up to 9/16” (14mm) diameter.
1/8”
3/16”
Application: FORD Control arm shaft mounting bolts up to 1/2” (12mm) diameter.
BS Illustration
US Illustration
Nominal Thickness
Bolt Opening
Part No.
Part No.
Nominal Thickness Bolt Opening
E13.20.116
1/16”
1/2”
E13.16.164 E13.16.132 E13.16.116 E13.16.18
1/64” 1/32” 1/16”
5/8” 5/8” 5/8” 5/8”
E13.20.18
1/8”
1/2”
Application: Universal type body shim.
1/8”
Application: Control arm shaft mounting bolts up to 5/8” diameter. Replacement for CO shims
Our unique anti-slip design allows adjustment of camber or toe. The metal shims are an economical alternative to full contact rear shims, but they should not be used when both camber and toe need to be adjusted. Offered in .010, .015, .020, and .030 inch thickness. • Cover a broad range of vehicles with a small inventory investment. • Cost only a small fraction of other rear wheel shims. • Made from accurate steel “shim stock” and lubricated to resist corrosion.
ALIGNMENT — SHIM TOOLS
8
EZ SHIM™ CUTTER E13.0195
This cutter is a necessary tool for proper cutting of the EZ Shim™. Its thin cutting blades minimize shim breakage and waste
Note: To only be used with EZ Shims
FULL CONTACT DUAL ANGLE EZ SHIM™ Adjusts Camber and Toe with only one shim. Available individually. Instruction sheets are included in each shim packet. Estimated installation time - .5 hr/side
— Grey EZ Shim™ Application: Acura: Integra, Audi: 100, 5000, Buick: Skyhawk, Skylark, Somerset, Cadillac: Cimarron, Chevrolet Beretta, Cavalier, Citation, Corsica, Chrysler: Town & Country, Dodge: Caravan, Ram Van, Ford: Windstar, Mercury: Villager, Nissan: Quest, Oldsmobile: Achieva, Calais, Firenza, Omega, Plymouth: Voyager, Pontiac: Grand Am, Phoenix , J2000, Sunbird, Sunfire. E13.0185 Caution: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Also, some vehicles may require the use of longer bolts.
Copyright © 2025
8-6-14
Made with FlippingBook - professional solution for displaying marketing and sales documents online