AUTOMOTIVE Wheel & Tire Suspension 6
ALIGNMENT — CAMBER & CASTER SLEEVES
FORD 2 & 4WD CAMBER/CASTER SLEEVE
These popular sleeves are widely used to adjust caster and/or camber on many Ford 2WD / 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks. One sleeve covers one side of the vehicle. Estimated Installation Time — .5 hr/side. Application:
2WD Adjustments Total Change
4WD Adjustments Total Change
2WD Adjustments Total Change
4WD Adjustments Total Change
Series Part No. E13.0025 E13.0050 E13.0075 E13.0100 E13.0125
Series Part No. E13.0150 E13.0175 E13.0200 E13.0225 E13.0250
.25 o (1/4 o ) .50 o (1/2 o ) .75 o (3/4 o ) 1.00 o (1 o )
.20° .40 o .60 o .75 o .90 o
1.50 o (1-1/2 o ) 1.75 o (1-3/4 o )
1.10 o 1.30 o 1.50 o 1.75 o 1.80 o
2.00 o (2 o )
2.25 o (2-1/4 o ) 2.50 o (2-1/2 o )
1.25 o (1-1/4 o )
Ford 2WD: 1987 & up K91.4093.250, 1987 - 1996 F150, H29.003 (L/D), 1989-90 Bronco ll, 1992 & up E150, E250, E350. 1991-94 Explorer, 1989-97 Ranger. Mazda: 1991-97 Navajo, Pickup. Ford 4WD: 1990 Bronco II, 1991-94 Explorer, 1990-97 Ranger. Mazda: 1991-97 Navajo, Pickup.
FORD & DODGE CAMBER/CASTER SLEEVE
Sleeves change camber, caster or both at the same time. To install, remove the upper ball joint stud nut and break taper free between the stud and sleeve. Calculate the change and install correct sleeve. One sleeve covers one side of the vehicle. Estimated Installation Time — .5 hr/side. Application:
Total Change
Series Part No. E13.1.150
1.50 o (1-1/2 o )
Ford 4WD: 1992 & up K91.4093.250 Crew Cab Pickup, Some H29.003 4WD w/straight axle, 1999 & up 350, 450, 550. Ford 4WD: 1999 & up G91.1603, 550 Crew Cab Pickup. Dodge: 1994-99 BR2500 4WD, BR3500 2WD/4WD.
FORD 4WD F250 & F350 CAMBER/CASTER SLEEVE
Ford changed the axle design in 2005 on their heavy duty trucks. These sleeves correct camber and caster on ‘05+ 4x4 H29.003 & K91.4093.250 Super Duty trucks. Estimated Installation Time — .5 hr/side.
Total Change
Series Part No. E13.3.150 E13.3.175 E13.3.200 E13.3.225 E13.3.250
Total Change
Series Part No. E13.3.00 E13.3.25 E13.3.50 E13.3.75 E13.3.100 E13.3.125
1.50 o (1-1/2 o ) 1.75 o (1-3/4 o )
0 o
.25 o (1/4 o ) .50 o (1/2 o ) .75 o (3/4 o ) 1.00 o (1 o )
2.00 o (2 o )
2.25 o (2-1/4 o ) 2.50 o (2-1/2 o )
1.25 o (1-1/4 o )
8
These camber/caster sleeves correct aligment problems on ‘05+ Ford G91.1603 & G91.1603 super- dury trucks. Requires 1 sleeve per wheel. Application: Ford RWD/ 4WD: 2005 & up G91.1603, F150, G85.14303 Coil Springs. Chevrolet/GM 4WD: 2005 & up Kodiak K4500 & Topkick K5500 Estimated Installation Time — .5 hr/side.
FORD F450 & F550 CAMBER/CASTER SLEEVE
Total Change
Series Part No. E13.3239 E13.3231
0 o
.25 o (1/4 o )
ALIGNMENT — CAMBER & CASTER KITS
EXPLORER/MOUNTAINEER CAMBER/CASTER KIT E13.7500
The 1995 & up Explorer and Mountaineer have a front torsion bar suspension with limited caster and no camber adjustment. This kit will provide up to 2 degrees positive or negative camber/caster adjustment. Simply replace the O.E. upper control arm mounting bolts with these cam bolts for a fast and efficient adjustment. One kit covers both sides of the vehicle. Estimated Installation Time — .5 hr/side. passenger side .7 hr/side. driver side Application: Ford: 1995 & up 2WD & 4WD Explorer, 1998 & up 2WD & 4WD Ranger
Mercury: 1995 & up 2WD & 4WD Mountaineer Mazda: 1998 & up 2WD & 4WD B-Series Pickup
Copyright © 2025
8-6-15
Made with FlippingBook - professional solution for displaying marketing and sales documents online