Chamfering Endmill AVIC
30°
Flute 3
Sharp Corners
Carbide Uncoated
Coat HARD
Chamfer
Twist Angle
Fig 1
90°
A
LU
B
0.2
LF
Part A Details
¢ Body Dimensions
Dimensions ( mm /inch)
Stock
Cutting Edge Length B
Cutting Edge Length APMX
Diameter DC
Neck Diameter UN
Neck Length LU
Overall Length LF
Shank Diameter
Catalog Number
For Titanium Alloys KH26
For Ni-based Alloys ACF07C
DMM Fig
AVIC 302000-45-0.4(E) AVIC 303000-45-0.6(E) AVIC 304000-45-0.8(E) AVIC 305000-45-1.0(E) AVIC 306000-45-1.4(E) AVIC 308000-45-1.5(E) AVIC 310000-45-1.7(E) AVIC 312000-45-2.0(E) AVIC 302383-45-0.4(E) AVIC 303175-45-0.6(E) AVIC 303969-45-0.8(E) AVIC 304763-45-1.0(E) AVIC 306350-45-1.4(E) AVIC 307938-45-1.5(E) AVIC 309525-45-1.7(E) AVIC 312700-45-2.0(E)
2.0 3.0 4.0 5.0 6.0 8.0
0.5 0.7 0.9 1.2 1.6 1.7 1.9 2.2
0.4 0.6 0.8 1.0 1.4 1.5 1.7 2.0
1.0 1.6 2.2 2.6 3.0 4.6 6.0 7.5
4 6 8
40 40 50 50 50 60 70 70
4 4 4 6 6 8
1 1 1 1 1 1 1 1
10 12 16 20 24
10.0 12.0 .094 .125 .156 .188 .250 .313 .375 .500
10 12
.020 .028 .035 .047 .063 .067 .075 .087
.016 .024 .031 .039 .055 .059 .067 .079
.051 .063 .083 .094 .118 .181 .220 .315
.154 .248 .311 .374 .500 .622 .811 .937
1.5 1.5 2.0 2.0 2.0 2.5 3.0 3.0
.125 1 .125 1 .188 1 .188 1 .250 1 .314 1 .375 1 .500 1
*ACF07C has an E at the end of the model number
Workpiece Material: Uncoated: KH26 Coated: ACF07C
¢ Recommended Cutting Conditions
Structural Steel, Carbon Steel SS, SC
Workpiece Conditions
Stainless Steel SUS304, SUS316
Ni-based Heat- Resistant Alloy
Titanium Alloy
Rotation Speed (RPM)
Feed Rate (IPR)
Rotation Speed (RPM)
Feed Rate (IPR)
Rotation Speed (RPM)
Feed Rate (IPR)
Rotation Speed (RPM)
Feed Rate (IPR)
DC ( mm )
2.0 3.0 4.0 5.0 6.0 8.0
11,100 66.93 8,000
4,800
28.35
16.93 3,200 7.48
7,400 43.31 5,300 18.90 3,200 11.42 2,100 5.12 5,600 33.07 4,000 14.17 2,400 8.66 1,600 3.94 4,500 26.38 3,200 11.42 1,900 6.69 1,300 3.15 3,700 22.05 2,700 9.45 1,600 5.51 1,100 2.36 2,800 16.54 2,000 7.48 1,200 4.33 800 1.97 2,200 12.99 1,600 5.51 960 3.54 640 1.57 1,900 11.02 1,300 4.72 800 2.76 530 1.18
10.0 12.0
1. If the workpiece or machine produces vibration or abnormal noises, change the cutting conditions according to the situation. 2. If the rotation speed of your machine does not reach the recommended speed, use the maximum rotation speed.
: Worldwide Warehouse Item Blank: Made-to-Order Item
4
Made with FlippingBook flipbook maker