SUMIDIA Coated Endmill for CFRP Machining AVIX
45°
Sharp Corners
SUMIDIA Coating
*for h6 tolerance, refer to chapter N of the general catalog
Side Milling
Slot Milling
Helical Milling
Ramping
Twist Angle
Spot Facing
Groove Finishing
Face Milling
Cut-Off
Fig 1
APMX
LF
RE
¢ Body Dimensions
Flute Dimensions ( mm /inch)
Cutting Edge Length APMX
Overall Length LF
Shank Diameter DMM
Diameter DC
Corner Radius RE
Catalog Number
Stock
# of Flutes Fig
AVIX404000-R03 AVIX506000-R03 AVIX508000-R03 AVIX510000-R03 AVIX612000-R03 AVIX403175-R03 AVIX506350-R03 AVIX509525-R03 AVIX612700-R03
4.0 6.0 8.0
0.3 0.3 0.3 0.3 0.3
12 18 24 30 36
60 70 80 80 90
4 6 8
4 5 5 5 6 4 5 5 6
1 1 1 1 1 1 1 1 1
10.0 12.0 .125 .250 .375 .500
10 12
.012 .012 .012 .012
0.394 0.748 1.102 1.535
2.362 2.756 3.150 3.543
.125 .250 .375 .500
Material: DCT30X
: Worldwide Warehouse Item
¢ Identification Code
Type AVIX 6 12700 - R03 # of Flutes Diameter Corner Radius
¢ Recommended Cutting Conditions
DC ( mm /inch) Workpiece Conditions
CFRP Dry
Rotation Speed (min -1 ) 12,000 10,600
Cutting Speed vc (SFM)
Feed Rate fz (IPR)
4.0 6.0 8.0
.003 - .007 .004 - .007 .005 - .010 .006 - .012 .007 - .015 .004 - .008 .006 - .012 .008 - .016
490 655 655 655 655 655 655 655
8,000 6,400 5,300
10.0 12.0 .125 .250 .375
12,000 395 .003 - .007
10,000 6,700
.500 5,000
1. If the workpiece or machine produces vibration or abnormal noises, change the cutting conditions according to the situation. 2. If the rotation speed of your machine does not reach the recommended speed, use the maximum rotation speed.
3
Made with FlippingBook flipbook maker