NEW PRODUCT INTRODUCTION July2024
M170 Cutting Parameter Recommended cutting data is based on universal working conditions, please adjust as appropriate.
Workpiece Materials
Tensile strength Rm(N/ mm²)
Brinell hardness (HB)
ISO
Material classification
125 190 210 190 300 220 175 300 380 430 200 300 400 200 330 200 300 230 200 260 180 245 155 265 230 30 100 75 90 130 70 100 90 110 300 200 280 250 350 320 200 375 410 300 300
Annealed Annealed Heat-treated Annealed Heat-treated Annealed
Easy cutting steel (short-chipping) C＞0.55% C＞0.55% C≤0.25% 0.25＜C≤0.55% 0.25＜C≤0.55%
428 639 708 639 1013 745 591 1013 1282 1477 675 1013 1361 675 1114 675 1013 778 400 700 200 350 400 700 400 340 260 310 450 250 340 310 380 1010 680 940 840 1180 1080 680 1260 1400 1010 1010
Non-alloyed steel
Heat-treated Heat-treated Heat-treated Annealed
P
Low-alloyed steel
Annealed High-alloyed steel and high-alloyed tool steel
Cu alloys, short-chipping Brass, bronze, red brass Unalloyed, electrolytic copper > 12% Si, non-aging ≤ 12% Si, aged ≤ 12% Si, non-aging aged non-aging Ferritic High tensile strength/austenitic Low tensile strength Pearlitic Ferritic Austenitic/ferritic, duplex Austenitic, precipitation hardened (PH) Austenitic, quench hardened Martensitic, heat-treated Ferritic/martensitic, annealed Pearlitic Hardened and tempered Hardened and tempered
Stainless steel Stainless steel Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV(CGI) Wrought aluminium alloys Cast aluminium alloys Magnesium-based alloys Copper and copper alloys (bronze/brass)
M
K
-
N
Fe-based Ni or Co based Pure titanium α and β alloys, hardened β alloys High tensile, Ampco
Annealed Hardened Annealed Hardened Cast
Heat-resistant alloys
S
Titanium alloys
Hardened and tempered Hardened and tempered Hardened and tempered Hardened and tempered Quenching cast steel Hardened steel Molybdenum alloys Tungsten alloys
50HRC 55HRC 60HRC 50HRC
H
www.achtecktool.com
11/14
ANPI NO.089
Made with FlippingBook - Online Brochure Maker