Grade 80 Lifting Chain & Fittings GRADE 60 STAINLESS STEEL LIFTING CHAIN & FITTINGS CROMOX Grade 60 Stainless Steel Chain Slings Cromox Chain Slings and Accessories from Ketten Wälder provide safety for demanding lifting and heavy-duty transports with superior protection against corrosion in harsh environments and increased longevity. Cromox chain slings are designed in Germany for superior safety and durability.
Contents
Ring-and hook-ended Slings similar DIN 5688-1 Grade 60
Method of lifting Angle of inclination
W.L.L. in (t)
1-Leg
2-Leg, 3-Leg & 4-Leg
3
// Grade 60 Stainless Steel Lifting Chain & Fittings
Direct
Tied
Direct
Tied
Direct
Tied
Nominal chain thickness acc. to DIN 5687
3-4
// Cromox Grade 60 Stainless Steel Chain Slings
5-6
// Cromox Oblong Master and Sub-Assembly with Flattened Section
4 5 6 7 8
0.35 0.60 0.90 1.20 1.50 2.40 3.85 5.00 7.00
0.30 0.45 0.70 0.95 1.20 1.90 3.10 4.00 5.60
0.50 0.85 1.25 1.65 2.10 3.35 5.40 7.00 9.80
0.40 0.65 1.00 1.35 1.65 2.70 4.30 5.60 7.80
0.35 0.60 0.90 1.20 1.50 2.40 3.85 5.00 7.00
0.30 0.45 0.70 0.95 1.20 1.90 3.10 4.00
7
// Cromox Clevis Hooks, Eye Hooks and Accessories
8 // Stainless Steel Wire Ropes & Fittings 9-11 // Stainless Steel Wire Rope & Ferrules 12 // Stainless Steel Chain 13-24 // Stainless Steel Fittings
10 13
16 (G5) 18 (G5)
5.60 The above-mentioned working load limits correspond approximately to the following load factors: 1.00 0.80 1.40 1.12 1.00 0.80 The strain must be reduced to 50 % of the W.L.L. for unbalanced lifting. Dependent on chain type and method of lifting. Note: Slings ending in Shackles may need to be de-rated to Grade 50 in some cases.
Loop chains vertically hanging
Basket chain with Master Link
W.L.L. in (t)
W.L.L. in (t)
Method of lifting Angle of inclination Nominal chain thickness acc. to DIN5687
Direct 0°°
Direct 0°
Tied 0°
Tied 0°
90°
120°
90°
120°
0.70 1.20 1.80 2.40 3.00 4.80 7.70
1.40 2.40 3.60 4.80 6.00 9.60
0.55 0.95 1.45 1.90 2.40 3.85 6.20 8.00
1.10 1.90 2.85 3.85 4.80 7.70
0.50 0.85 1.25 1.65 2.10 3.35 5.40 7.00 9.80
0.40 0.65 1.00 1.35 1.65 2.70 4.30 5.60 7.80
0.75 1.25 1.90 2.50 3.15 5.00 8.10
0.55 0.90 1.35 1.80 2.25 3.60 5.80 7.50
4 5 6 7 8
10 13
15.40 20.00 28.00
12.30 16.00 22.40
10.00 14.00
10.00 14.70
16 (G5) 18 (G5)
11.20 10.50 The above-mentioned working load limits correspond approximately to the following load factors: 2.00 2x2 1.60 3.20 1.40 1.12 2.10 1.50 In (presumably arising) bending stresses the working load must be reduced as follows: 1.60 2 x 1.60 1.10 0.80 1.70 1.20 The strain must be reduced to 50 % of the W.L.L. for unbalanced lifting. Dependent on chain type and method of lifting .
2 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577
CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 3
Made with FlippingBook - Online Brochure Maker