Custom Bore Measurement
Custom Bore Measurement Deep Hole Pneumatic
APPLICATION GAUGING
Deep Hole Pneumatic
Deep Hole Pneumatic Bore Gauging
Operated by a pneumatic actuator powered by a 3 bar compressed air supply - either from a compressor or a workshop air-line. The measurement data is collected by a capacitive probe fitted just behind, and in constant contact with the measuring head. This direct contact ensures high-quality transducer-type accuracy, even at great depths. Measurements are taken by pressing a footswitch connected to the airline and the data is then passed automatically via cable back down the bore to the digital readout at the operator end.
Features
• Measures diameters from 50-500mm, up to 15m deep • 6 Bar air pressure required either from compressor or factory air supply • Spherical, Tungsten Carbide anvils • 2 point and 3 point heads available • Accuracy +/-0.005mm (subject to bore condition) • Quick set-up time • Easy to use • Not adversely effected by temperature fluctuation • Robust design • Various readouts available • Portable compressor can be provided • Guide sleeves recommend on heads and every other extentions
2 Point
3 Point
64
63
A visit from a Company Sales Engineer gave Bowers an in-depth appreciation of our complex mould measuring problems and resulted in Bowers designing and quoting a custom designed bore gauging system. Having recently taken delivery of the Bowers system, we are delighted with its performance.
Shaun Simmons - Celsa Manufacturing UK
Go back to Contents
Bowers Group | sales@bowersgroup.co.uk | www.bowersgroup.co.uk
Made with FlippingBook Digital Proposal Creator