Fluke 750 Series Documenting Process Calibrators
Recommended Accessories
Whether you’re calibrating instruments, troubleshooting a problem or running routine maintenance, Fluke’s 753 and 754 Series Process Calibrators can help you get the job done faster They do so many different tasks, so quickly and so well and they are the only process calibrators you need to carry • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters etc • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters • Power transmitters during test using loop supply with simultaneous mA measurement • Measure/source pressure using any of Fluke’s 50 Pressure Modules • Measure and source simultaneously with one compact, rugged, reliable tool • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations and record and document results • Advanced features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more • Control the temperature of selected HART ® Scientific Dry Blocks • Handle fast pulsed RTD transmitters and PLCs in RTD source mode with 1 ms response time • Three year warranty
750PXX Pressure Modules See page 116
750SW DPC/TRACK2 Software See page 166
700PTP-1 Pneumatic Test Pump See page 164
C799 Field Soft Case See page 154
Fluke 753
700HTP-2 Hydraulic Test Pump See page 164
754HCC Smart Instrument Communication Cable
Fluke 754
Bundle Package
Pressure Enabled
HART is a registered trade mark of the HART Communications Foundation
Included Accessories Stackable Test Leads (3 sets), TP220 Test Probes (3 sets) with extended Tooth Alligator Clips (3 sets), AC280 Hook Clips (2 sets), BP7240 Li-ion Battery Pack, BC7240 Battery Charger, C799 Field Soft Case, USB Communication Cable, Getting Started Guide, Instruction Manual on CDROM, NIST Traceable Certificate of Calibration, DPCTrack™ 2 Sample Software that enables upload and printing of calibration records, 754 HHC HART ® Communication Cable (754 only) Ordering Information FLUKE-753 Documenting Process Calibrator FLUKE-754 Documenting Process Calibrator HART ® FLUKE-754/ 750SW Fluke 754/750SW 754DPC and 750SW DPCTRACK2 Bundle Package Purchase the Fluke 754 with the Fluke DPC/TRACK2™ software at a special bundle package price For more information, go to fluke com/au/754 754DPC and 750SW DPCTRACK2 Bundle Package
Instrumentation Management Software The Fluke 753 and 754 are compatible with Fluke 750SW DPC/TRACK2 software and with software from Cornerstone, Emerson, Honeywell, On Time Support, Prime Technologies, Yokogowa, Intools, Meridium and Beamex For more information, visit www fluke com au The Fluke 754 offers all of the capabilities of the 753, plus the ability to calibrate, maintain and troubleshoot HART instrumentation Integrated HART communication functions permit you to monitor, control and calibrate HART instrumentation It handles fast pulsed instruments such as RTD transmitters and PLCs responding to pulses within 1 ms Fluke 753: A complete Documenting Calibrator The Fluke 753 is a complete multifunction documenting calibrator and includes a PC interface that lets you load procedures, lists and instructions created with software— or unload data for printing, archiving, and analysis The 753 can hold a full week of calibrations and procedures Fluke 754: Get HART-ability™
Functions DC voltage DC current Resistance Frequency
Measure
Sourcing
0 020% reading + 0 005% full scale
0 01% output + 0 005% full scale
0 01% reading + 5 µA 0 05% reading + 50 mΩ
0 01% output + 0 003 mA 0 01% output + 240 mΩ
0 to 50 KHz, ± 0 5 Hz to 1100 Hz
0 to 50 KHz, ± 0 1 Hz to 1099 9 Hz
Thermocouples 0 3°C
0 2°C 0 1°C
RTDs
0 3°C
Pressure
To 0 025% of full scale, per pressure module specifications
General Specifications Battery life
Typically over eight hours
Internal battery pack Li ion 4400 mAh Battery replacement
Via twist lock fastener without opening calibrator; no tools required
Weight
1 2kg
Size (HxWxD)
245mm × 136mm × 63mm
RTDs
0 3°C
FLUKE-750SW DPC/TRACK2 Software
Pressure
To 0 025% of full scale, per pressure module specifications
108
Process Calibration Tools
Electrical and Multifunction Calibration
Made with FlippingBook Learn more on our blog