Fluke 805 FC Vibration Meter Forget the pens, think meter
Recommended Accessories
The Fluke 805 FC is not a vibration pen; it’s a meter A Fluke meter that eliminates the confusion of vibration screening and provides reliable measurements you can trust to make critical go or no-go maintenance decisions With the Fluke 805 FC, you can identify the strength and severity of vibration and easily track the data over time to monitor an asset’s condition • Innovative sensor design minimises measurement variations caused by device angle or contact pressure • Consistent data quality at both low and high frequency ranges • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition • Exportable data via USB • Trending in Microsoft ® Excel using pre-built templates • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect ® Cloud • Fluke Connect ® Share-Live™ video call • Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements • Temperature measurement with Spot Infrared Sensor increases diagnostic capabilities • On-board memory holds and saves up to 3,500 measurements • One year warranty
Fluke 805ES External Assembly Vibration Sensor See page 165
Fluke 820-2 LED Stroboscope The Fluke 820-2 LED Stroboscope is a simple, easy to use tool to stop motion for measurement and diagnostic purposes Investigate and observe potential mechanism failure with confidence on a variety of machinery, in a wide range of industries, without making physical
Fluke 805 FC
Included Accessories USB Cable, Storage Case, Belt Holster, Quick Reference Guide, CD-ROM (includes MS Excel Template and Documentation) and Two AA Batteries Ordering Information FLUKE-805FC Fluke Connect ® Vibration Meter • Digital pulse width modulation for exceptionally sharp images at high speeds • Rugged, durable design utilises solid-state LEDs with no filaments, gases, hollow cavities, or glass • Quartz-accuracy control system provides high accuracy — 0 02% (± 1 digit) • Multi-line LCD display • Check the rotating speed of machinery without physical contact or need for reflective tape contact with the machine The Fluke 820-2 LED Stroboscope is a rugged, compact, portable strobe with high intensity LED head, ideal for stop motion diagnostics, mechanical troubleshooting, and process or product research and development • High intensity 7-LED array—4,800 Lux @ 6,000 FPM/30 cm • High efficiency LED solid-state light source with uniform flash characteristics allow for higher flash rates—30-300,000 FPM (flashes per minute)
Specifications Vibration meter
Low frequency range (overall measurement) High frequency range (CF+ measurement)
10 Hz to 1,000 Hz
4,000 Hz to 20,000 Hz
Severity levels
Good, Satisfactory, Unsatisfactory, Unacceptable 50 g peak (100 g peak-peak)
Vibration limit A/D converter
16-bit 80 dB
Signal to noise ratio
Sampling rate
Low frequency: 20,000 Hz; High frequency: 80,000 Hz
Real time clock backup
Coin battery
Sensitivity
Sensor
100 mV/g ± 10%
Measurement range Low frequency range (overall measurement) High frequency range (CF+ measurement)
0 01 g to 50 g
10 Hz to 1,000 Hz
4,000 Hz to 20,000 Hz
Resolution Accuracy
0 01 g
At 100 Hz ± 5% of measured value
Range
Infrared thermometer (temperature measurement)
-20°C to 200°C
Accuracy
±2°C
Focal length
Fixed, at ~3 8 cm
Frequency range 10 Hz to 1,000 Hz Bias voltage (to supply power) 20 V DC to 22 V DC Bias Current (to supply power) Maximum 5 mA
External sensor (Supported, but not provided)
External interfaces
Firmware
USB 2 0 (full speed) communication Database on internal flash memory
Data capacity
Memory IP rating Drop test
Up to 3,500 measurements
Environmental
IP54
FLUKE 805ES
External Vibration Sensor for 805 Vibration Meter LED Stroboscope
1 metre
Battery type Battery life
General specifications
AA (2) Alkaline or Lithium-ion 2 V DC
250 measurements
Size (LxWxH) and Weight
25 72 cm × 16 19 cm × 9 84 cm, 1 16 kg USB mini-B 7-pin, stereo audio output jack (3 5 mm Audio Plug), external sensor jack (SMB connector)
FLK-820-2
Connectors
C ontact your local distributor for price and availability. fluke.co/wtb
132
Mechanical Maintenance
Made with FlippingBook Learn more on our blog