AC CURRENT CLAMPS
Current Clamps AC
i3000s Flex-24 or -36 AC Current Clamp i3000s Flex-24 is available in a convenient four-pack (i3000s Flex 4 Pack) The flex clamp uses the Rogowski (air- cored coil) principle and can be used to measure three ranges of currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers The flexible and lightweight measuring head allows quick and easy installation in hard-to-reach areas without batteries or an external power source This clamp fits around large conductors and is available in 610 mm and 914 mm lengths • Current range: 30 A, 300 A, and 3000 A switchable • Frequency range: 10 Hz to 50 kHz • Safety rating: CAT III 600 V i5s AC Current Clamp Also available in a convenient three-pack (i5sPQ3) This compact 5 A AC clamp, specially configured to provide low-current accuracy while taking measurements on secondary current transformers, expands the use of the Fluke 430 Series Three-Phase Power Quality Analysers • Current range: 10 mA to 5 A • Frequency range: 40 Hz to 5 kHz • Safety rating: CAT III 600 V (for insulated conductors only)
i200s AC Current Clamp This small-sized dual-range current clamp offers voltage output using a safety-insulated BNC connector A dual banana-to-BNC adapter allows the clamp to be connected to meters with banana inputs • Current ranges: 0 1 A and 200 A AC switchable • Frequency range: 40 Hz to 10 kHz • Safety rating: CAT III 600 V
i800 AC Current Clamp This AC current clamp is designed to extend the current measuring capability of a digital multimeter to 800 A AC It is compatible with a digital multimeter that accepts shrouded 4 mm banana plugs and has an AC milliamp range • Current range: 100 mA to 800 A RMS AC • Frequency range: 30 Hz to 10 kHz (-3 dB) • Safety rating: CAT III 600 V RMS i400 AC Current Clamp This high-safety current clamp for digital multimeters is a single range 400 A AC clamp that is designed to offer maximum utility in a very compact shape The division ratio is 1000:1 • Current range: 1 A to 400 A AC • Frequency range: 5 kHz to 20 kHz (-3 dB) • Safety rating: CAT IV 600 V, • CAT III 1000 V i400s AC Current Clamp This high-safety compact current clamp with BNC output is a companion to a ScopeMeter or Power Quality Meter to measure up to 400 A AC • Current range: 0 5 A to 400 A AC • Frequency range: 5 Hz to 10 kHz (-3 dB) • Optional PM9081/001 Dual Banana Plug Male to Female BNC Adapter is available for digital multimeters • Safety rating: CAT IV 600 V, CAT III 1000 V
i2000 Flex AC Current Clamp This current probe can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders, or data loggers The flexible and lightweight measuring head allows quick and easy installation on thick and hard-to-reach areas • Current range: 20 A, 200 A, and 2000 A AC switchable • Frequency range: 10 Hz to 20 kHz • Safety rating: CAT III 600 V i1000s AC Current Clamp This large AC current clamp expands applications in industrial and power environments by connecting directly to an oscilloscope using a reinforced coaxial cable and an insulated BNC connector It is ideal for measuring distorted current waveform RMS and harmonics • Current range: 0 1 A to 1000 A AC • Frequency range: 10 Hz to +9100 kHz • Accurate displays due to a passive filter that eliminates noise and ring on rapidly-rising di/dt waveforms • Safety rating: CAT III 600 V
i6000s Flex-24 or -36 AC Current Clamp This AC current clamp flexible and lightweight measuring head allows quick and easy installation in hard-to-reach areas without batteries or an external power source This clamp fits around large conductors and is available in both 610 mm and 914 mm lengths • Current range: 60 A, 600 A, and 6000 A switchable • Frequency range: 10 Hz to 50 kHz (-3 dB) • Safety rating: CAT III 600 V
i200 AC Current Clamp This small-sized single-range current clamp features safety-shrouded 4mm banana plugs It is compatible with most Digital Multimeters or other current measurement devices that accepts shrouded 4 mm banana plugs and has an AC milliamp range • Current range: 1 A to 200 A AC • Frequency range: 40 Hz to 40 kHz • Safety rating: CAT III 600 V
i3000s AC Current Clamp This AC current clamp is designed as a clamp-on unit for use with Oscilloscopes It also includes a dual banana to BNC adapter for use with multimeters with 4mm banana input plugs • Current range: 1 A to 3000 A • Frequency range: 10 Hz to 100 kHz • Safety rating: CAT III 600 V
fluke.co/accessories
Fluke Accessories
149
Made with FlippingBook Learn more on our blog