Fluke Australia 2021 Test Tools Catalogue

Fluke 381 Remote Display True-RMS AC/DC Clamp Meter with iFlex ®

The world’s most advanced clamp meter

Recommended Accessories

Fluke 381

The Fluke 381 True-RMS AC/DC Clamp Meter combines iFlex ® flexibility with remote reading capability for the ultimate in innovation and safety Now one technician can do jobs that would otherwise require two people Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings The iFlex ® Flexible Current Probe (included) expands the measurement range to 2500 A AC while providing increased display flexibility With a cord that runs 6 feet, you can finally measure those tight spaces, awkward sized conductors and disorganised wires • Remote display reads measurements up to 9 1 metres away • iFlex ® Flexible Current Probe included,18 inch circumference • 2500 A AC current measurement with iFlex ® • 999 9 A AC and DC current measurement with fixed jaw • 1000 V AC and DC voltage measurement • Frequency measurement to 500 Hz • 60 kΩ resistance measurement • Min/Max/Avg and inrush recording • CAT IV 600 V, CAT III 1000 V • Three year warranty

TL175 TwistGuard ™ Test Leads See page 142

TLK289 Industrial Master Test Lead Set See page 142

AC87 Heavy Duty Bus Bar Clip Set See page 142

FTP-1 SureGrip ™ Fused Test Probe Set See page 142

Fluke 381

C345 Large Soft Case See page 153

i2500-10 10 inch iFlex ® Flexible Current Probe See page 29

True RMS

Fluke 365

FTPL-1 SureGrip ™ Fused Test Probe and Lead Set See page 143

TL71 Premium Test Lead Set See page 141

Fluke 365 Detachable Jaw True-RMS AC/DC Clamp Meter

Where rugged meets reliable The Fluke 365 True-RMS AC/DC Clamp Meter offers a small, detachable jaw with 1 2 metres of coil that makes it easy to take and read measurements in tight or hard-to-reach places • 200 A AC and DC current measurement with detachable jaw • 600 VAC and DC voltage measurement • Detachable jaw makes accessing wires and viewing the display easier • Built in flashlight/torch allows for easy illumination and identification of wires • CAT III 600 V • Compact design fits in your hand and can be used while wearing protective equipment • State of the art signal processing allows for use in noisy electrical environments while providing stable readings • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement • Three year warranty See detailed specifications chart on page 27.

TL220 SureGrip™ Industrial

TL224 SureGrip ™ Silicone Insulated Test Leads See page 142

Test Lead Set See page 145

AC285 SureGrip ™ Alligator Clips See page 142

C43 Small Soft Case See page 153

Included Accessories 18-inch iFlex ® Flexible Current Probe (Fluke 381 only), Test Leads, Soft Carrying Case, Instruction Card, Safety Information Sheet, Two AA Alkaline Batteries Ordering Information FLUKE 381 Remote Display True- RMS AC/DC Clamp Meter with iFlex ® FLUKE 365 Detachable Jaw True-RMS AC/DC Clamp Meter

Fluke 365

True RMS

C ontact your local distributor for price and availability. fluke.co/wtb

fluke.co/clamps

Clamp Meters

33

Made with FlippingBook Learn more on our blog