Fabrication & Installation
BIO (Built-In-Overlap) Our BIO has flat edges on two adjoining sides of the ATI MirroFlex Wall panel. By orienting all sheets in the same direction and overlapping the panels, the seams are less noticeable. The placement of the sheet is also more flexible so that slight imperfections in the substrate will not affect the finished look. When overlapping four ATI MirroFlex Wall panels, it is necessary to cut a ½" notch in panels 2 and 3 to avoid a bulge where the panels meet.
Pattern Orientation In the 2' x 2' Glue Up size of Mojave, Sahara and Wavation, you can get a “checkerboard effect” by alternating between V (vertical) and H (horizontal) panels. When specifying for this application, please add a “V” or an “H” to any of these designs. Shown to the right are 2' x 2' examples, which also show our BIO feature. Sahara and Wavation 4' x 8' sheets are also available in both the vertical and horizontal orientation.
Inside + Outside Corners Inside and outside corners can be a challenge for installers. In addition to our trim strips (shown on page 61), installers have successfully used a commercial heat gun to gently heat the proper areas and bend ATI MirroFlex Wall for great looking edges.
Bead + Button Certain MirroFlex patterns that do not have a BIO may have a Bead + Button feature. To install, overlap two or more sheets or tiles on the Bead + Button perimeter which will join at the pre-determined connection points.
Adhesives Many different adhesives and application techniques can be used to apply MirroFlex products. Trowel on latex adhesives are recommended for adhering MirroFlex sheets to a wall. Brush-on or roller-on types, non-flammable, and water based contact adhesives (which are suitable for PVC) can also work well with MirroFlex. The following is meant as a guideline for adhesives that have been tested, and work well with MirroFlex products: • Titebond® Advanced Polymer • Titebond® Fast Grab FRP
Cleaning + Care Clean only with warm, soapy water. Never use abrasive cleaners or anything with harsh chemicals. A high quality auto polish may be used to help protect the finish.
Storage Store flat and acclimatize in the same environment for at least 24 hours before fabrication.
62
FABRICATION & INSTALLATION
63
Made with FlippingBook Digital Proposal Creator