Tech, Terms, & FAQs
Frequently Asked Questions Can I customize MirroFlex with my own design or a custom color? Yes. Due to the manufacturing processes, there is a minimum requirement for a custom design or color. We will be glad to discuss the requirements with you and see if this solution is feasible for your project. Do the seams show in MirroFlex panels and Glue-Up ceiling tiles when you put them side by side? MirroFlex panels and Glue-Up ceiling tiles with the BIO (Built In Overlap) feature are designed to minimize the appearance of seams and makes installation easy and forgiving. How do you cut MirroFlex? MirroFlex can be easily cut using normal household scissors or a utility knife. Remember to measure and mark a straight line before you make your cut. If using a utility knife, score the sheet on the front/decorative side and then break the product as opposed to cutting all the way through. What is “cut-to-size”? When ATI cuts the product to fit your size specifications. There is a charge for cut-to-size orders, and certain tolerances apply. How does MirroFlex ship? ATI makes every effort to ship in the most efficient way. We have partnered with packaging engineers and specialists to develop special cartons, skids, and crates for shipping. Visit our YouTube Channel, YouTube.com/MirroFlex, to learn more about ATI's Shipping Procedures. What is the heat resistance of MirroFlex? Can I use it in my kitchen? Never expose MirroFlex products to heat in excess of 140 ° F. It can be used in kitchens, but refrain from installing it behind a drop-in cooktop, as it may deform when exposed to heat. MirroFlex should not be exposed to long periods of excessive heat.
Contact ATI Laminates
Since ATI products are used for many different applications, MasterFormat (CSI) Numbering will vary. See the inside cover for MirroFlex MasterFormat (CSI) numbering.
Useful Terms
Panels, Tiles, and Sheets
BIO (Built-In-Overlap) Overlap system that hides seams and makes installation easy, fast, and forgiving. Bead + Button Certain MirroFlex patterns that do not have a BIO may have a Bead + Button feature. The Bead + Button overlaps two or more sheets or tiles on the bead and button perimeter which will join at the pre-determined connection points. EccoFlex Made from 40% pre-consumer recycled content material and contribute to LEED credits. See page 11. EccoFlex 2.0 A PVC-free option that is recyclable and allows you to enjoy all of the same benefits of MirroFlex. See page 11. GridMax A patented, snap-on grid cover designed to make grid systems invisible. See page 60. Tegular The tile has 4 flat edges to allow the tile to fit nicely into the grid system. Tegular tiles are designed to fit most 15/16" and 9/16" 2' x 2' grid systems, and can be found in our Lay-In ceiling tiles.
Wall Panels Available in both 4' x 8' and 4' x 10' tiles, MirroFlex Structures deeply textured wall panels are designed with an overlap (see BIO) or Bead + Button system to make installation easy, fast, and forgiving. Glue-Up Ceiling Tiles Available in both 2' x 2' and 2' x 4' tiles, they are designed with an overlap (see BIO) or Bead + Button system to make installation easy, fast, and forgiving. Glue-Up tiles can be used on ceilings and walls. Lay-In Ceiling Tiles Available in both 2' x 2' and 2' x 4' sizes, Lay-In ceiling tiles are designed to lay inside 15/16" grid systems. Some 2' x 2' and 2' x 4' sizes might produce sag and require a small amount of panel adhesive in the center to adhere to an existing mineral fiber tile. Acoustic/Perforated Ceiling Tiles Available in 2' x 2' size, Decorative Acoustic ceiling tiles are perforated to increase sound absorption and offer acoustic qualities. MirroFlex Lite Ceiling Tiles Ultra-thin, cost-effective 2' x 2' Lay-In tiles that are .013 " thick. Some finishes are available as a Drop-Out Ceiling Tile, designed to fall out of 15/16 " grid systems when exposed to heat from a developing fire. Wainscoting Available in 30" x 48" or 32" x 48" panels, depending on the design. Wainscoting utilizes BIO for simple installation. Also suitable for full wall and ceiling installations. Please call ATI Customer Service for more information on MirroFlex products and solutions.
Technical Information
Fire Retardant Test: ASTM E-84 Results: Class A
Solvent Resistance Results: 50 MEK
MEK Double Rubs/Crockmeter Results: Withstands 70 cycles
Impact Resistance Test: ASTM D5420 Results: >2” lbs per mill of thickness
Abrasion Resistance Test: Taber Results: Patina w/ TuffCote: 4,700* Argent Finishes: 5,000* EccoFlex Finishes: 1,000* Humidity Test: 12 hours 96-100% RH @ 40° C on MDF Mold Testing Test: ASTM G21 Results: <1% of Growth
What types of substrates can MirroFlex be applied to? With the proper adhesive, virtually any substrate will work.
Check ATILaminates.com for updated technical information and installation videos for MirroFlex products.
How do you determine fire, impact, and stain resistance? ATI employs third-party testing facilities to independently verify MirroFlex’s technical attributes.
Noise Reduction Coefficient Test: ASTM C423 + SAE J2883
*Check our websites for up-to-date testing data.
64
TECH, TERMS, & FAQS
65
Made with FlippingBook Digital Proposal Creator