Using Mountz torque analyzers to ensure consistent quality can reduce the risk of lost products on the line or failures in the field. We have analyzers designed for the most efficient pass/fail assessments, models that use an internal computer to measure and display results in research and quality management environments, and even ones that connect to external torque sensors. Whatever variety you need, our torque testers are designed to fit into your processes and production environment.
RDA Selection Guide for EZ-TorQ III Joint Similutars for testing power torque tools
Mountz run down adapters (RDA) are designed to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics and provide a more accurate torque reading during testing and calibration process.
Run down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly.
RDA units Supplied with EZ-TorQ III
Suggested RDA for Soft Joint
Suggested RDA for Hard Joint
TORQUE ANALYZER MODEL
TORQUE RANGE LBF.IN
TORQUE RANGE USAGE
TORQUE RANGE USAGE
TORQUE RANGE USAGE
DRIVE SIZE
RDA MODEL
RDA MODEL
RDA MODEL
EZ-TorQ III 1i
0.1–1
1/4" F/Sq
Screw RDA–M2Q
0.3–1 lbf.in
- - - - - -
- - - - - -
- - - - - -
- - - - - -
EZ-TorQ III 3i
0.3–3
1/4" F/Sq
Screw RDA–M2Q
0.3–3 lbf.in
- - - - - -
- - - - - -
RDA-S0
0.3–3 lbf.in
EZ-TorQ III 5i
0.5–5
1/4" F/Sq
Screw RDA–M3Q
0.5–5 lbf.in
- - - - - -
- - - - - -
RDA-S1.5
0.5–5 lbf.in
EZ-TorQ III 10i
1–10
17mm F/Hex
Screw RDA–M2
1–4 lbf.in
Screw RDA–M3
4–10 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 50i
5–50
17mm F/Hex
Screw RDA–M3
4–10 lbf.in
Screw RDA–M4
10–50 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 100i
10–100
17mm F/Hex
Screw RDA–M4
10–50 lbf.in
Screw RDA–M6
10–100 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 150i
15–150
17mm F/Hex
Screw RDA–M4
10–50 lbf.in
Screw RDA–M8
15–150 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 300i
30–300 17mm F/Hex
Screw RDA–M8
15–150 lbf.in
Screw RDA–M12
30–300 lbf.in
- - - - - -
- - - - - -
A run down adapter is re- quired when testing power tools with the EZ-TorQ III.
Mountz Inc. | Phone: 408.292.2214 | mountztorque.com
RDA Selection Guide for EZ-TorQ III Joint Similutars for testing power torque tools
Mountz run down adapters (RDA) are designed to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics and provide a more accurate torque reading during testing and calibration process.
Run down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly.
Optional RDA units to use with EZ-TorQ III
Suggested RDA for Soft Joint
TORQUE ANALYZER MODEL
TORQUE RANGE LBF.IN
TORQUE RANGE USAGE
TORQUE RANGE USAGE
TORQUE RANGE USAGE
DRIVE SIZE
RDA MODEL
RDA MODEL
RDA MODEL
EZ-TorQ III 1i
0.1–1
1/4" F/Sq
RDA-S0
0.3–1 lbf.in
- - - - - -
- - - - - -
- - - - - -
- - - - - -
EZ-TorQ III 3i
0.3–3
1/4" F/Sq
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
EZ-TorQ III 5i
0.5–5
1/4" F/Sq
RDA-S0
0.5–3 lbf.in
RDA-S10
1–5 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 10i
1–10
17mm F/Hex
RDA-S10
1–6.1 lbf.in
RDA-S15
2.1–10 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 50i
5–50
17mm F/Hex
RDA-S15
5–11.5 lbf.in
RDA-S75
6.9–50 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 100i
10–100
17mm F/Hex
RDA-S75
10–52.1 lbf.in
RDA-S200
15.6–100 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 150i
15–150
17mm F/Hex
RDA-S200
15.6–121.5 lbf.in
RDA-S400
48.6 - 150 lbf.in
- - - - - -
- - - - - -
EZ-TorQ III 300i
48.6 - 286.4 lbf.in
RDA-S600
48.6–300 lbf.in
30–300 17mm F/Hex
RDA-S200
30–121.5 lbf.in
RDA-S400
A run down adapter is re- quired when testing power tools with the EZ-TorQ III.
Mountz Inc. | Phone: 408.292.2214 | mountztorque.com
Page 1 Page 2Made with FlippingBook Annual report maker