Using Mountz torque analyzers to ensure consistent quality can reduce the risk of lost products on the line or failures in the field. We have analyzers designed for the most efficient pass/fail assessments, models that use an internal computer to measure and display results in research and quality management environments, and even ones that connect to external torque sensors. Whatever variety you need, our torque testers are designed to fit into your processes and production environment.
RDA Selection Guide for TorqueLab® LTT-Series Torque Analyzer Joint Similutars for testing power torque tools
Mountz run down adapters (RDA) are designed to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics and provide a more accurate torque reading during testing and calibration process.
Run down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly.
RDA units Supplied with LTT-Series
Suggested RDA for Hard Joint
TORQUE ANALYZER MODEL
TORQUE RANGE USAGE
TORQUE RANGE DRIVE SIZE
RDA MODEL
LTT10i
1 - 10 lbf.in
1/4" F/Sq
RDA-10i
1 - 10 lbf.in
LTT25i
2.5 - 25 lbf.in
1/4" F/Sq
RDA-25i
2.5 - 25 lbf.in
LTT50i
5 - 50 lbf.in
1/4" F/Sq
RDA-50i
5 - 50 lbf.in
LTT100i
10 - 100 lbf.in
1/4” F/Sq
RDA-100i
10 - 100 lbf.in
LTT250i
25 - 250 lbf.in
1/4” F/Sq
RDA-250i
25 - 250 lbf.in
LTT50F
5 - 50 lbf.ft
3/8” F/Sq
RDA-50F
5 - 50 lbf.ft
Mountz Torque Webinar - View On-Demand
LTT100F
10 - 100 lbf.ft
1/2" F/Sq
RDA-100F
10 - 100 lbf.ft
How to Implement an Effective Torque Measurement & Calibration Program A torque measurement and calibration program reduces risk and ensures conformity with quality standards and regulatory compliance. Torque measurement isn’t a single process or event in manufacturing products. It should occur in all three facets of the assembly process—prior, during, and after manufacturing. Measuring torque improves quality and process control. Learn how to implement a successful torque testing and calibration program.
LTT250F
25 - 250 lbf.ft
1/2” F/Sq
RDA-520F
25 - 250 lbf.ft
Optional RDA units to use with LTT-Series
Suggested RDA for Hard Joint
TORQUE ANALYZER MODEL
TORQUE RANGE USAGE
TORQUE RANGE DRIVE SIZE
RDA MODEL
LTT10i
1 - 10 lbf.in
1/4" F/Sq
RDA-25i
2.5 - 10 lbf.in
LTT25i
2.5 - 25 lbf.in
1/4" F/Sq
RDA-10i
2.5 - 10 lbf.in
LTT50i
5 - 50 lbf.in
1/4" F/Sq
RDA-25i
5 - 25 lbf.in
LTT100i
10 - 100 lbf.in
1/4” F/Sq
RDA-50i
10 - 50 lbf.in
LTT250i
25 - 250 lbf.in
1/4” F/Sq
RDA-100i
25 - 100 lbf.in
LTT50F
5 - 50 lbf.ft
3/8” F/Sq
RDA-750i
75 - 600 lbf.in
LTT100F
10 - 100 lbf.ft
1/2" F/Sq
- - - - - -
- - - - - -
LTT250F
25 - 250 lbf.ft
1/2” F/Sq
RDA-100F
25 - 100 lbf.ft
Mountz Inc. | Phone: 408.292.2214 | mountztorque.com
RDA Selection Guide for BMX Joint Similutars for testing power torque tools
Mountz run down adapters (RDA) are designed to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics and provide a more accurate torque reading during testing and calibration process.
Run down adapters are mounted in-line between the tool drive and the transducer of a torque sensor or analyzer, reducing the impact and irregular peaks that cause poor testing repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly.
Optional RDA units to use with the BMX
Suggested RDA for Hard Joint
Suggested RDA for Soft Joint
TORQUE SENSOR MODEL
TORQUE RANGE USAGE
TORQUE RANGE USAGE
TORQUE RANGE USAGE
TORQUE RANGE DRIVE SIZE
RDA MODEL
RDA MODEL
RDA MODEL
BMX20z
2 - 20 ozf.in
1/4" F/Sq
Screw RDA–M2Q
4.8 - 20 ozf.in
- - - - - -
- - - - - -
RDA-S0
4.8 - 20 ozf.in
BMX40z
4 - 40 ozf.in
1/4" F/Sq
Screw RDA–M2Q
4.8 - 40 ozf.in
- - - - - -
- - - - - -
RDA-S0
4.8 - 20 ozf.in
BMX80z
8 - 80 ozf.in
1/4" F/Sq
Screw RDA–M2Q
8 - 48 ozf.in
Screw RDA–M3Q 8.8 - 80 ozfin
RDA-S1.5
8.8 - 80 ozfin
BMX10i
1 - 10 lbf.in
1/4” F/Sq
RDA-10i
1 - 10 lbf.in
RDA-25i
2.5 - 10 lbf.in
- - - - - -
- - - - - -
BMX25i
2.5 - 25 lbf.in
1/4” F/Sq
RDA-25i
2.5 - 25 lbf.in
RDA-10i
2.5 - 10 lbf.in
- - - - - -
- - - - - -
BMX50i
5 - 50 lbf.in
1/4” F/Sq
RDA-50i
5 - 50 lbf.in
RDA-25i
5 - 25 lbf.in
- - - - - -
- - - - - -
BMX100i
10 - 100 lbf.in
1/4” F/Sq
RDA-100i
10 - 100 lbf.in
RDA-50i
10 - 50 lbf.in
- - - - - -
- - - - - -
BMX250i
25 - 250 lbf.in
1/4” F/Sq
RDA-250i
25 - 250 lbf.in
RDA-100i
25 - 100 lbf.in
- - - - - -
- - - - - -
BMX500i
50 - 500 lbf.in 3/8” F/Sq
RDA-750i
75- 500 lbf.in
RDA-50F
60- 500 lbf.in
- - - - - -
- - - - - -
BMX750i
75 - 750 lbf.in 3/8” F/Sq
RDA-750i
75 - 750 lbf.in
RDA-50F
75- 600 lbf.in
- - - - - -
- - - - - -
BMX50F
5 - 50 lbf.ft
3/8” F/Sq
RDA-50F
5 - 50 lbf.ft
RDA-750i
6.2 - 50 lbf.ft
- - - - - -
- - - - - -
BMX100F
10 - 100 lbf.ft
1/2” F/Sq
RDA-100F
10 - 100 lbf.ft
RDA-250F
25 - 100 lbf.ft
- - - - - -
- - - - - -
BMX250F
25 - 250 lbf.ft
1/2” F/Sq
RDA-250F
25 - 250 lbf.ft
RDA-100F
25 - 100 lbf.ft
- - - - - -
- - - - - -
BMX500F
50 - 500 lbf.ft
3/4” F/Sq
RDA-500F
50 - 500 lbf.ft
- - - - - -
- - - - - -
- - - - - -
- - - - - -
BMX1000F
100 - 1000 lbf.ft
1” F/Sq
RDA-1000F
100 - 1000 lbf.ft
- - - - - -
- - - - - -
- - - - - -
- - - - - -
BMX2500F
250 - 2500 lbf.ft
1 1/2" F/Sq
RDA-2500F
250 - 2500 lbf.ft
RDA-5000F
500 - 2500 lbf.ft
- - - - - -
- - - - - -
BMX5000F
500 - 5000 lbf.ft
1 1/2” F/Sq
RDA-5000F
500 - 5000 lbf.ft
RDA-2500F
500 - 2500 lbf.ft
- - - - - -
- - - - - -
Mountz Inc. | Phone: 408.292.2214 | mountztorque.com
Page 1 Page 2Made with FlippingBook Annual report maker