ELECTRICAL — SWITCHES
TOGGLE SWITCHES ACCESSORIES
COLE HERSEE PN
Toggle Boot w/ 15/32-32 thread. Provides protection against salt spray and is resistant to weather and ozone. Can be used on toggle switches w/ 15/32” diameter mounting stem.
25-370P 81264 (Gray)
2 Position Toggle Switch. 10A @ 12V
Weather Resistant Toggle Switch — 2 Positions: On-Off, SPST, Rated 20A Knurled face nut, hex back nut, and 2 plastic coated wire leads 8” long Chrome plated bat handle, mounting stem 15/32 dia, 3/8” long
34-571CP † —
Toggle Switch Guard — Spring loaded snap action holds the guard cover in the up or down position. Switch cannot be operated with the cover in the down position. Recommended for use with two position (Off-On or On-On) toggle switches with standard 11/16” bat handle and 15/32” diameter mounting stem and keyway.
Face Plate for 51-902EP
Recess Plate — Switch guards help prevent accidental actuation of a toggle switch and protect it from damage. Needs to be countersunk in a 2” (50.8mm) hole. 3 3/16” (81.0mm) diameter with three 7/32” (5.6mm) holes on a 2 3/4” (69.9mm) diameter circle. Requires a clearance depth of .890” (22.6mm), not including clearance for a switch.
† Denotes application of a California Prop 65 warning as follows: WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov.
Made with FlippingBook Annual report